Additional Mappings and Updates

[sHedC]

Update the Mappings with the following

DEVICE_DATA_MAP = {
"hp_power_state": ["bool", "D_3"],
"hp_function": ["int", "I_51"], # 0: heating, #1: cooling, #3: auto
"cooling_mode": ["bool", "D_4"],
"domestic_hot_water": {
"function": ["bool", "D_66"],
"enabled": ["bool", "D_275"],
"current_temp": ["float", "A_126"],
"required_temp": ["float", "A_129"],
"min": ["float", "A_296"],
"max": ["float", "A_297"]
},
"pool_function": ["bool", "D_43"],
"compressor_running": ["bool", "D_5"],
"compressor2_running": ["bool", "D_32"],
"circulation_pump_running": ["bool", "D_10"],
"fan_running": ["bool", "D_8"],
"defrost_mode": ["bool", "D_11"],
"aux_heater_1": ["bool", "D_6"],
"aux_heater_2": ["bool", "D_7"],
"outside_temp": ["float", "A_3"],
"requested_temp": ["float", "A_5"],
"actual_temp": ["float", "A_1"],
"dewp_control": ["bool", "D_196"],
"hdo_on": ["bool", "D_15"],
"runtime_info": {
"compressor_run_time": ["int", "I_11"],
"compressor_start_counter": ["int", "I_12"],
"pump_runtime": ["int", "I_13"],
"aux1_runtime": ["int", "I_100"],
"aux2_runtime": ["int", "I_101"],
},
"season_info": {
"hp_season": ["bool", "D_24"],
"hp_seasonset": ["int", "I_50"],
"hp_season_winter": ["float", "A_82"],
"hp_season_summer": ["float", "A_83"]
},
"error_info": {
"some_error": ["bool", "D_20"],
"three_errors": ["bool", "D_21"],
"reset_3e": ["bool", "D_19"],
"safety_tstat": ["bool", "D_77"],
"alarm_a": ["int", "I_20"],
"alarm_b": ["int", "I_21"],
"alarm_c": ["int", "I_22"],
"alarm_d": ["int", "I_23"],
"alarm_e": ["int", "I_24"],
"alarm_f": ["int", "I_25"],
"alarm_g": ["int", "I_26"],
"alarm_h": ["int", "I_27"],
"alarm_i": ["int", "I_28"],
"alarm_j": ["int", "I_39"],
"alarm_k": ["int", "I_40"],
"alarm_l": ["int", "I_41"],
"alarm_m": ["int", "I_42"]
},
"heating_circuits": DEVICE_DATA_HCMAP,