Could not determine a constructor for the tag '!lambda'
konceptnet opened this issue · 1 comments
konceptnet commented
Im getting this error at line 60 of my esphome configuration file for my nspanel :
substitutions:
devicename: nspanel-2
friendly_devicename: NSPanel 2
panel_recv_topic: "tele/home_affichage/RESULT"
panel_send_topic: "cmnd/home_affichage/CustomSend"
esphome:
name: $devicename
esp32:
board: esp32dev
wifi:
networks:
ssid: !secret ssid_iot
password: !secret ssid_psk
use_address: !secret
# Logger. Disable the temperature sensor etc. to focus on the HMI development
logger:
level: DEBUG
logs:
sensor: WARN
resistance: WARN
text_sensor: WARN
ntc: WARN
ota:
password: !secret ota_pwd
safe_mode: true
# API. Add api_pwd to your secrets.yaml.
api:
services:
- service: upload_tft
variables:
url: string
then:
- lambda: |-
id(nspanel).upload_tft(url);
# Service to play a rtttl tone
# - service: play_rtttl
# variables:
# song_str: string
# then:
# - rtttl.play:
# #rtttl: !lambda "return song_str;"
# Service to send a command directly to the display. Useful for testing
- service: send_command
variables:
cmd: string
then:
- lambda: "id(nspanel).send_custom_command(cmd.c_str());"
# Service to pusblish to mqtt used for refreshin the panel
- service: publish_to_recv_topic
variables:
cmd: string
then:
- mqtt.publish:
topic: $panel_recv_topic
#Here is my line 60 and I got the same thing at rttl.play few line earlier
payload: !lambda "return cmd;"
# Service to send a command wake the screen
- service: wake
then:
- lambda: 'id(nspanel).send_custom_command("wake");'
# Service to send a command to show screensaver (some of the values are hardcoded)
- service: show_screensaver
then:
- mqtt.publish:
topic: $panel_recv_topic
payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
# Service to navigate to screen
- service: navigate_to_page
variables:
page: string
then:
- mqtt.publish_json:
topic: $panel_recv_topic
payload: |-
root["CustomRecv"] = "event,buttonPress2,navigate." + page + ",button";
# Service to send a command disable screensaver
- service: disable_screensaver
then:
- lambda: 'id(nspanel).send_custom_command("timeout~0");'
# Service to send a command enabled screensaver
- service: enable_screensaver
then:
- lambda: 'id(nspanel).send_custom_command("timeout~20");'
# Service to send a command wake the screen
- service: dim_0_to_100
variables:
intensity: string
then:
- lambda: 'id(nspanel).send_custom_command("dimmode~"+intensity+"~100");'
# Service to send a command To show the screen of a specific like
- service: show_entity
variables:
entity: string
title: string
then:
- lambda: 'id(nspanel).send_custom_command("pageType~popupLight~" + title + "~" + entity);'
# Service to send a command To show the screen of a specific like
- service: notify_on_screensaver
variables:
line1: string
line2: string
then:
- lambda: 'id(nspanel).send_custom_command("notify~" + line1 + "~" + line2);'
- rtttl.play: "short:d=4,o=5,b=100:16e6"
# Service to send a command To show the screen of a specific like
# interaction of the buttons are on implemented yet
- service: notify_fullscreen
variables:
title: string
description: string
button1: string
button2: string
time_secs: string
then:
# show notification screen
- lambda: 'id(nspanel).send_custom_command("pageType~popupNotify");'
# set values on notification screen
# color defined as number created in binary and converted to decimal (rrrrggggbbbbaaaa)
- lambda: 'id(nspanel).send_custom_command("entityUpdateDetail~id~"+ title + "~65535~" + button1 +"~3840~" + button2 + "~61440~" + description + "~65535~" + time_secs);'
- rtttl.play: "scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b"
# Uart for the Nextion display
uart:
tx_pin: 16
rx_pin: 17
baud_rate: 115200
# Functionality for the Nextion display
external_components:
- source:
type: git
url: https://github.com/sairon/esphome-nspanel-lovelace-ui
ref: dev
components: [nspanel_lovelace]
mqtt:
id: mqtt_client
broker: !secret mqtt_host
username: !secret mqtt_user
password: !secret mqtt_password
nspanel_lovelace:
id: nspanel
mqtt_recv_topic: $panel_recv_topic
mqtt_send_topic: $panel_send_topic
sensor:
# Internal temperature sensor, adc value
- platform: adc
id: ntc_source
pin: 38
update_interval: 10s
attenuation: 11db
# Internal temperature sensor, adc reading converted to resistance (calculation)
- platform: resistance
id: resistance_sensor
sensor: ntc_source
configuration: DOWNSTREAM
resistor: 11.2kOhm
# Internal temperature sensor, resistance to temperature (calculation)
- platform: ntc
id: temperature
sensor: resistance_sensor
calibration:
b_constant: 3950
reference_temperature: 25°C
reference_resistance: 10kOhm
name: $friendly_devicename Temperature
output:
# Buzzer for playing tones
- platform: ledc
id: buzzer_out
pin:
number: 21
# Rtttl function for buzzer
rtttl:
id: buzzer
output: buzzer_out
switch:
# Physical relay 1
- platform: gpio
name: $friendly_devicename Relay 1
id: relay_1
pin:
number: 22
on_turn_on:
# show a light on the panel when we swich on the light
# - lambda: 'id(nspanel).send_custom_command("pageType~popupLight~[TITLE TO SHOW ON SCREEN]~[ENTITY NAME]");'
- lambda: 'id(nspanel).send_custom_command("pageType~popupLight~Light 1~light.bed_light");'
on_turn_off:
# send to screensaver when switch off the light
- mqtt.publish:
topic: $panel_recv_topic
payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
# Physical relay 2
- platform: gpio
name: $friendly_devicename Relay 2
id: relay_2
pin:
number: 19
on_turn_on:
# show a light on the panel when we swich on the light
- lambda: 'id(nspanel).send_custom_command("pageType~popupLight~Light 2~light.bed_light2");'
on_turn_off:
# send to screensaver when switch off the light
- mqtt.publish:
topic: $panel_recv_topic
payload: '{"CustomRecv":"event,sleepReached,cardGrid"}'
# Turn screen power on/off. Easy way to configure the screen power control, but this should not be used from HA, as all components must be re-initialized afterwards. For lights, names of lights etc. this practically means that the state must change once to happen.
- platform: gpio
name: Screen Power
id: screen_power
entity_category: config
pin:
number: 4
inverted: true
restore_mode: ALWAYS_ON
# Binary sensors
binary_sensor:
# Left button below the display
- platform: gpio
name: $friendly_devicename Left Button
pin:
number: GPIO14
inverted: true
id: left_button
on_press:
then:
- switch.turn_on: relay_1
# Right button below the display
- platform: gpio
name: $friendly_devicename Right Button
pin:
number: GPIO27
inverted: true
id: right_button
on_press:
then:
- switch.toggle: relay_2
sairon commented
I have fixed the syntax in your original post but I was not able to reproduce that error. Had to change all !secret occurrences to dummy values though - I suggest you to check if that's not somehow causing it.
But since the error doesn't seem to be anyhow related to ESPHome NSPanel component, I suggest you to create a minimal example that reproduces the case and report it in https://github.com/esphome/issues - it should at least get a better traction there.