Energy-related sensors are not enabled by default
Closed this issue · 11 comments
Do you have the same problem?
Now i don't it is ha problem or echonetlite problem.
My HA version is 2024.4.3
echonetlite is lastest version.
After update , i find some sensor became unavailabe. Like air conditioner power sensor. Both two air conditioner power sensor became unavailable. And others the same. Like Storage battery. Half of sensors is unavailable.
@leonunix In HACS HA settings menu, Devices and Services, from this integration screen , enable the debug function, restart HA, wait about 5 minutes, then disable the debug function to download the log. Can you attach that log file here?
hi nao-pon
here is my log.
Looking at the logs, it appears that some data cannot be retrieved at first, but after several inquiries, it appears to be available.
Were the sensors currently marked "unavailable" previously available?
thank you for confirm it. But after data come. It should be became available. But it still unavailable.
A closer look at the logs shows that some sensor entities may have switched to input entities. For example, AC discharge amount setting value might be configured as a numeric input entity. The sensor entity that has been switched to the input entity is no longer usable, so there is no problem in deleting it.
If you used the value of that sensor in the past, such as in an automation, change it to reference the value of the input entity, or create a sensor in a helper that references the value of the input entity.
hi nao-pon
The best problem is measured_cumulative_power_consumption never show again of my air con. Did you measured_cumulative_power_consumption display normal?
Is the "Enable energy-related sensors (if available)" (ja:"エネルギー関連のセンサーを有効にする(取得可能な場合)") setting in the device settings enabled?
hi nao-pon
this options default enable. But after i disable/enable it. It works. Thank you very much. It maybe old configuration problem.
Maybe not. I delele device ,and add it again. The Enable energy-related sensors is default on. But sensor will not display on entity. When i disable/enable it. It work fine.
Yes, I have confirmed that the option does not take effect on a new setup. This is a bug so I will fix it.