Issues
- 0
Overlay on PCB reversed in relation to SCH
#398 opened by MatBier - 1
v1.6.1 chnagelog
#397 opened by gkasprow - 2
simultaneous error of all channels
#393 opened by jbqubit - 0
ESD susceptibility
#396 opened by gkasprow - 3
booster self testing capability
#394 opened by gkasprow - 2
v1.6 Mainboard bug
#391 opened by filipswit - 5
Liquid cooling
#395 opened by jordens - 3
production
#392 opened by gkasprow - 37
- 1
v1.6rc1 review
#390 opened by filipswit - 0
v1.6 changelog
#389 opened by gkasprow - 17
Interlock detectors may not assert properly
#369 opened by ryan-summers - 2
Reverse power interlock net names
#371 opened by hartytp - 1
User_IFC ENC424J600 production issue
#372 opened by gkasprow - 8
- 19
AM keying distortion
#368 opened by jordens - 0
Booster HL assembly notes
#386 opened by gkasprow - 13
Cost/robustness/support/maintainability improvements
#378 opened by jordens - 2
production
#382 opened by gkasprow - 76
High harmonic content
#380 opened by gkasprow - 0
Booster HL testing
#385 opened by gkasprow - 5
ADS7924 AVDD supply lower than expected
#366 opened by ryan-summers - 9
new Ethernet MAC+PHY
#364 opened by gkasprow - 0
- 4
P3V3 rail is programmed for 3.44V
#367 opened by ryan-summers - 9
TCP connection refused
#387 opened by margieb - 22
Interlock tripping too early
#375 opened by hartytp - 7
Step Response Ringing
#384 opened by ibloomfield - 17
v1.5 testing
#373 opened by hartytp - 2
project status
#377 opened by hartytp - 54
I2C encountering bus errors
#379 opened by ryan-summers - 1
Harmonic Distortion
#381 opened by hartytp - 0
output interlock value not saving
#376 opened by hartytp - 25
Dead channel on 003B002F3037470535353239
#357 opened by hartytp - 2
- 10
- 24
TVS testing
#350 opened by hartytp - 31
Firmware specification
#360 opened by hartytp - 6
interlock flop connection
#370 opened by jordens - 10
v1.3 changes
#365 opened by hartytp - 7
v1.5 changelog
#354 opened by gkasprow - 0
locking washers
#363 opened by jordens - 7
General status of project
#362 opened by gji - 4
v1.4 RF PA PCB mounting screw clearance
#353 opened by dnadlinger - 6
Pre-production design review remarks
#356 opened by bjuszczyk - 4
ethernet fallback
#355 opened by hartytp - 3
document fan control
#351 opened by hartytp - 10
- 2
- 4
Interlock sensitive to modulating RF power
#349 opened by connorgoham