No Keyboard or Mouse showing on host device
Opened this issue · 8 comments
Image version 1.0.0 running Application version 2.0.9.
Connected to a non graphical linux host i can see the console on screen and login prompt but keyboard and mouse are not being seen.
If i log into the host and check USB devices it is not showing any keyboard or mice.
This has worked with previous application versions.
I've tried on multiple hosts including a Mac Mini and a DIY built system.
Also used 3 or 4 different USB-A to USB-C cables without any success so far. Have 2 new short cables on the way for more testing.
Under the keyboard icon there is "Reset HID device". If you press this, does that somehow help solving it?
I also have the same issue, using the paste option to send commands to the remote device works, but this is not great.
ok, i have found a solution. I just got a shorter new USB-A ro USB-C cable and that is working fine. Keyboard and Mouse are working.
I bought the 0.5m version of this - EBAY
When i login to my Linux host i can see the following has now been added
[352795.930549] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[352796.010305] usb 1-1.4: New USB device found, idVendor=3346, idProduct=1009, bcdDevice= 5.10
[352796.010314] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[352796.010318] usb 1-1.4: Product: licheervnano
[352796.010320] usb 1-1.4: Manufacturer: flyingrtx
[352796.010322] usb 1-1.4: SerialNumber: 0123456789ABCDEF
[352796.013480] input: flyingrtx licheervnano as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:3346:1009.0001/input/input13
[352796.064899] hid-generic 0003:3346:1009.0001: input,hidraw0: USB HID v1.01 Keyboard [flyingrtx licheervnano] on usb-0000:00:1d.0-1.4/input2
[352796.066330] input: flyingrtx licheervnano as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:3346:1009.0002/input/input14
[352796.066520] hid-generic 0003:3346:1009.0002: input,hidraw1: USB HID v1.01 Mouse [flyingrtx licheervnano] on usb-0000:00:1d.0-1.4/input3
[352796.068028] input: flyingrtx licheervnano as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.4/0003:3346:1009.0003/input/input15
[352796.068194] hid-generic 0003:3346:1009.0003: input,hidraw2: USB HID v1.01 Mouse [flyingrtx licheervnano] on usb-0000:00:1d.0-1.4/input4
[352796.091436] usb-storage 1-1.4:1.5: USB Mass Storage device detected
[352796.091984] usbcore: registered new interface driver cdc_ether
[352796.093340] scsi host4: usb-storage 1-1.4:1.5
[352796.093492] usbcore: registered new interface driver usb-storage
[352796.097269] rndis_host 1-1.4:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.4, RNDIS device, aa:c0:fa:79:16:84
[352796.097314] usbcore: registered new interface driver uas
[352796.097317] usbcore: registered new interface driver rndis_host
[352796.179637] rndis_host 1-1.4:1.0 enp0s29u1u4: renamed from usb0
[352797.150503] scsi 4:0:0:0: Direct-Access Linux File-Stor Gadget 0510 PQ: 0 ANSI: 2
[352797.150908] sd 4:0:0:0: Attached scsi generic sg2 type 0
[352797.151350] sd 4:0:0:0: Power-on or device reset occurred
[352797.152010] sd 4:0:0:0: [sdb] 45950976 512-byte logical blocks: (23.5 GB/21.9 GiB)
[352797.152671] sd 4:0:0:0: [sdb] Write Protect is off
[352797.152673] sd 4:0:0:0: [sdb] Mode Sense: 0f 00 00 00
[352797.153489] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[352797.156873] sdb:
[352797.157115] sd 4:0:0:0: [sdb] Attached SCSI removable disk
If i do an lsusb i can see this
[root@docker ~]# lsusb
Bus 001 Device 004: ID 3346:1009 flyingrtx licheervnano
@haggis-supper And what cables were you using so far? The ones included with NanoKVM?
Cause I'm also having issues with mouse/keyboard :/
@haggis-supper And what cables were you using so far? The ones included with NanoKVM? Cause I'm also having issues with mouse/keyboard :/
I have the NanoKVM Lite, so you do not get any cables with it.
Just the barebones board that you need to add cables and an SD card too.
I have 3d designed my own case for it Thingiverse
I see. Thanks for explanation. I've got full package so it came with 2 USB-A / USB-C cables but I've got issues using any of them. I've just bought 0,5m high quality cable. They should deliver it tomorrow and we'll see.
Actually I found some different cable in my "maybe I will need it some day store" and it worked!
So seems that this device is pretty sensitive when it comes to cable quality / lenght.