Replace power connection with 2.1ID 5.5OD barrel connector
Closed this issue · 2 comments
benjamin-wilson commented
Most 5v power supplies available come with a 2.1ID 5.5OD barrel connector. This will reduce the amount of work to get a bitaxe working and provide a little protection against shorting.
When creating the connector large pads should be also made underneath if possible so that the connector can be de-soldered and wires can be soldered directly to the PCB for other projects.
benjamin-wilson commented
Cost effective candidate: https://www.digikey.com/en/products/detail/tensility-international-corp/54-00127/9685436
skot commented
this is fixed in v1.1