bitaxeorg/ultraHex

Issues

• Heatsink mounting holes

  #47 opened 5 months ago by IsaacFurlani
  0

• How to use esp-miner for hex?

  #44 opened 8 months ago by chenyang2151
  3

• CPL Files please

  #45 opened 6 months ago by Dan-Rdd
  1

• unrouted tracks on board

  #43 opened 8 months ago by chenyang2151
  9

• Document efficiency compared to other ASICs

  #27 opened 9 months ago by brandonros
  5

• ADC inputs for domain voltage sense need dividers

  #42 opened 9 months ago by macphyter
  1

• Extender Voltage Range

  #3 opened 9 months ago by Mairex2000
  4

• Add Efuse

  #23 opened 9 months ago by benjamin-wilson
  3

• Draw voltage domain boundaries on silkscreen

  #40 opened 9 months ago by macphyter
  1

• Change power input to XT30

  #38 opened 9 months ago by macphyter
  1

• optimize voltage regulator input and output capacitors

  #29 opened 9 months ago by skot
  1

• Add pullup resistors to the I2C signals

  #39 opened 9 months ago by macphyter
  2

• Change temperature sensors to a larger package

  #35 opened 9 months ago by macphyter
  1

• Change the silkscreen for L1 and L2 by considering the "start of winding"

  #34 opened 9 months ago by aaron3481
  1

• update BM1366 footprint with latest from bitaxe v206 library

  #33 opened 9 months ago by skot
  2

• Reset signals connected in parallel instead of series

  #37 opened 9 months ago by macphyter
  2

• Add voltage sensing to each domain in order to check voltage balance

  #36 opened 9 months ago by macphyter
  1

• Use fixed LDOs and get rid of some resistors.

  #31 opened 9 months ago by benjamin-wilson
  1

• Level shifter Opamp Vs is outside recommended operating range

  #30 opened 9 months ago by skot
  2

• Dedicated DC converter for each BM1366?

  #32 opened 10 months ago by nikwest
  1

• bitaxeHex-303-schematic.pdf missing

  #28 opened a year ago by GTCLive
  2

• rackable version !

  #19 opened a year ago by phil31
  3

• Replace DigiKey Tape & Reel part numbers with Cut Tape ones in BOM

  #26 opened a year ago by sarog
  1

• Need diode on 5V regulator output

  #18 opened a year ago by macphyter
  2

• 5V power from the USB-C connector

  #24 opened a year ago by macphyter
  2

• Add BAP to Hex

  #21 opened a year ago by benjamin-wilson
  1

• Provide 3.3V to TPS546 for configuration

  #17 opened a year ago by macphyter
  1

• SMD Buttons are too small

  #22 opened a year ago by skot
  1

• ESP-Miner dev status

  #25 opened a year ago by GTCLive
  2

• Fan connector interferes with OLED

  #16 opened a year ago by macphyter
  1

• More heatsink mounting holes

  #20 opened a year ago by benjamin-wilson
  1

• Fan PWM may need a 5V pullup

  #15 opened a year ago by macphyter
  1

• change PN for power connector to one that includes screws.

  #13 opened a year ago by skot
  1

• core voltage is too high for ESP32 ADC measurement

  #10 opened a year ago by skot
  3

• USB-C port needs clearance for plug enclosure

  #2 opened a year ago by skot
  4

• Heatsink hole spacing

  #5 opened a year ago by jeca32
  1

• C8 needs higher voltage rating

  #14 opened a year ago by skot
  1

• R45 should be 10k

  #12 opened a year ago by skot
  1

• change nominal TPS40305 output to 3.6V

  #11 opened a year ago by skot
  1

• fan should be 12V

  #9 opened a year ago by skot
  1

• C15 is wrong part size

  #8 opened a year ago by skot
  1

• C20-22 are the wrong footprint

  #7 opened a year ago by skot
  1

• U1 footprint is missing a pin

  #6 opened a year ago by skot
  1

• Needs fiducials

  #1 opened a year ago by macphyter
  1

• 3d model

  #4 opened a year ago by jeca32
  1