Grid and Inverter Data
Opened this issue · 1 comments
Is there an existing issue for this?
- I have searched the existing issues
Current Behavior
Voltage from Inverter and Grid not in the right Positions
My House have this Configuration
Grid -> SDM230 Powermeter 1 -> Hybrid Inverter -> SDM230 Powermeter 2 -> LOAD
If the Powermeter 1 say we have Power Cut. The Dashbord show me 230V and 50 Hz on the Grid Tab.
First i think i do some entities on the wrong possession but then i check all the entities and there is nothing wrong.
Expected behaviour
Inverter Output Voltage and Frequency over the Inverter in the Tab
Grid Voltage and Frequency in the Gird Tab
If Grid Voltage or Frequency 0 / None / Unknown = Off-Grid
And maybe connect the Grid Line to the inverter like in the "Lite" version.
Possible Solutions
No response
Mode
full
Context / Reason
Values on the right position make more sense.
Thank you
Hi. Yes that would make more sense but this becomes a problem when three phase is enabled as there is no more space. The trade off is to provide the sensors you would prefer to see. i.e. SDM230 Powermeter 1 to the red box and only monitor inverter power out and amps.