[Bug]: No BMS Data via MQTT

[sideshowbob100]

Is there an existing issue for this?

• I have searched the existing issues

Used Hardware?

Wemos D1 Mini

What happened?

Daly2MQTT in general works. The Web Interface is showing the different values of the BMS.
Then I connected the Wemos via Wifi with my iobroker but in iobroker only one object is available (alive = true). There are no more objects.
What can I do?

Screenshots / Fotos

Steps To Reproduce

Version

2.x.x and above

Relevant livejson output

{"Device":{"Name":"DALY-BMS-to-MQTT","IP":"192.168.178.43","ESP_VCC":2.984,"Wifi_RSSI":-49,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.2.18","Flash_Size":4194304,"Sketch_Size":420048,"Free_Sketch_Space":3751936},"Pack":{"Voltage":52.7,"Current":6.9,"Power":363.63,"SOC":62.5,"Remaining_mAh":100000,"Cycles":9,"BMS_Temp":17,"Cell_Temp":17,"High_CellNr":8,"High_CellV":3.314,"Low_CellNr":1,"Low_CellV":3.291,"Cell_Diff":23,"DischargeFET":true,"ChargeFET":true,"Status":"Charge","Cells":16,"Heartbeat":129,"Balance_Active":false},"CellV":{"CellV_1":3.291,"Balance_1":false,"CellV_2":3.293,"Balance_2":false,"CellV_3":3.291,"Balance_3":false,"CellV_4":3.292,"Balance_4":false,"CellV_5":3.292,"Balance_5":false,"CellV_6":3.291,"Balance_6":false,"CellV_7":3.298,"Balance_7":false,"CellV_8":3.313,"Balance_8":false,"CellV_9":3.294,"Balance_9":false,"CellV_10":3.3,"Balance_10":false,"CellV_11":3.297,"Balance_11":false,"CellV_12":3.295,"Balance_12":false,"CellV_13":3.297,"Balance_13":false,"CellV_14":3.296,"Balance_14":false,"CellV_15":3.296,"Balance_15":false,"CellV_16":3.294,"Balance_16":false},"CellTemp":{"Cell_Temp_1":17}}

Which BMS is connected?

BMS 16s 80A

What browsers are you seeing the problem on?

Safari, Microsoft Edge

[softwarecrash]

Hello,
from the screenshots i see you use the sonoff adapter, you need the mqtt broker/client adapter, set it as broker, and change the port to like 1885 (in esp too) to avoid collision with the sonoff adapter

[sideshowbob100]

THX. Now it works.