Status if cells will be balanced are no longer published
Closed this issue · 2 comments
Bavarialex commented
Is there an existing issue for this?
- I have searched the existing issues
Used Hardware?
Wemos D1 Mini
What happened?
Since update to the current release 2.12.0 the topics which cells get active balance are no longer updated.
Balance active state works...
Screenshots / Fotos
no Fotos
Steps To Reproduce
No response
Version
2.x.x and above
Relevant livejson output
{"Device":{"Name":"Daly2MQTT","IP":"10.11.12.165","ESP_VCC":3.396,"Wifi_RSSI":-53,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.12.0","Flash_Size":4194304,"Sketch_Size":448464,"Free_Sketch_Space":3723264},"Pack":{"Voltage":13,"Current":10,"Power":130,"SOC":68.3,"Remaining_Ah":102.4,"Cycles":1,"BMS_Temp":21,"Cell_Temp":21,"cell_hVt":3.65,"cell_lVt":2.3,"cell_hVt2":3.75,"cell_lVt2":2.5,"pack_hVt":14.6,"pack_lVt":9.2,"pack_hVt2":14.7,"pack_lVt2":10,"High_CellNr":2,"High_CellV":3.269,"Low_CellNr":3,"Low_CellV":3.244,"Cell_Diff":25,"DischargeFET":true,"ChargeFET":true,"Status":"Charge","Cells":4,"Heartbeat":41,"Balance_Active":false,"Fail_Codes":""},"CellV":{"CellV_1":3.26,"CellV_2":3.269,"CellV_3":3.244,"CellV_4":3.25},"CellTemp":{"Cell_Temp_1":21}}Which BMS is connected?
4S 100A daly UART
What browsers are you seeing the problem on?
Chrome
softwarecrash commented
Have you read the release notes for the V2.12.0 ?
⚠️ Removed cell balance states for single cells due to compliance to Daly previous and current protocol communication.
⚠️ Changed remaining Capacity from mAh to Ah due to compliance to Daly previous and current protocol communication.
Bavarialex commented
Oh shit, it's not a bug but a feature... ;-)
Apologize for this - can be closed...