Daly2MQTT creates strange datapoints / folders in ioBroker object tree
Closed this issue · 5 comments
Is there an existing issue for this?
- I have searched the existing issues
Used Hardware?
Wemos D1 Mini
What happened?
Daly2MQTT is working fine. After 2 days of using it, I get some strange looking datapoints added by Daly2MQTT:
Screenshots / Fotos
Steps To Reproduce
I deleted all of the new useless datapoints, the next day there were new ones created. They become more and more the longer the software is active.
Version
2.x.x and above
Relevant livejson output
{"Device":{"Name":"Daly2MQTT","IP":"192.168.2.152","ESP_VCC":3.378,"Wifi_RSSI":-58,"Relais_Active":false,"Relais_Manual":false,"sw_version":"2.12.0","Flash_Size":4194304,"Sketch_Size":448464,"Free_Sketch_Space":3723264},"Pack":{"Voltage":27,"Current":0.8,"Power":21.6,"SOC":56.8,"Remaining_Ah":130.6,"Cycles":0,"BMS_Temp":17,"Cell_Temp":17,"cell_hVt":3.65,"cell_lVt":2.3,"cell_hVt2":3.65,"cell_lVt2":2.65,"pack_hVt":29.2,"pack_lVt":18.4,"pack_hVt2":29.2,"pack_lVt2":22,"High_CellNr":6,"High_CellV":3.384,"Low_CellNr":3,"Low_CellV":3.38,"Cell_Diff":4,"DischargeFET":true,"ChargeFET":true,"Status":"Stationary","Cells":8,"Heartbeat":131,"Balance_Active":false,"Fail_Codes":""},"CellV":{"CellV_1":3.382,"CellV_2":3.383,"CellV_3":3.38,"CellV_4":3.382,"CellV_5":3.382,"CellV_6":3.384,"CellV_7":3.383,"CellV_8":3.383},"CellTemp":{"Cell_Temp_1":17}}Which BMS is connected?
Daly 150A, UART
What browsers are you seeing the problem on?
Safari
please check your wifi strength, this behavior comes when while transimitting data the connection abort or esp restart
OK, I will try to find a better place for the D1.
Thanks so far
OK, I will try to find a better place for the D1. Thanks so far
or use a D1 mini Pro with ceramic antenna or external antenna
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.