[Bug]: ESP01 after reboot does not connect at all or poorly to the AP
Closed this issue · 6 comments
Is there an existing issue for this?
- I have searched the existing issues
Used Hardware?
ESP-01S (1MB Flash)
What happened?
ESP won't connect to ASUS router after entering SSID and PWD and restarting. Sometimes it takes up to 30 minutes. I think a permanent setting to the B/G standard would help. I had a similar problem with EspEasy, where after entering force B/G the problem went away.
Thanks for the help J.
Screenshots / Fotos
No
Steps To Reproduce
No response
Version
2.x.x and above
Relevant livejson output
NoWhich BMS is connected?
BMS 16S 100A
What browsers are you seeing the problem on?
Chrome
hello,
i don't know an option to force the esp to the b/g network mode.
there is a known bug with "PMF" when your router have this option, disable it.
They write about the option of forced mode here : letscontrolit/ESPEasy#2012 or here : https://www.reddit.com/r/esp8266/comments/5inhtw/how_to_change_radio_type_from_80211g_to_80211n/ or here: sidoh/esp8266_milight_hub#448 Unfortunately, I can't implement this into the source code and then compile it.
J.
seems like a problem with your asus router (asus make crap firmware)
fritzbox, unify, and much other works without any problems.
i cant make a mixed b/g function, with this is only b
try this
Daly2MQTT_d1_mini_2.13.0A1_debug.zip
but i cant build in it actualy as option
Hi, this software version works absolutely perfectly, wemos connects immediately after reboot.
Good work .
Thank you
This issue is stale because it has been open for 30 days with no activity.
This issue was closed because it has been inactive for 14 days since being marked as stale.