The automated release is failing 🚨
djcsdy opened this issue · 6 comments
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
🚨 The automated release from the master
branch failed. 🚨
I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.
You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.
Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.
Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master
branch. You can also manually restart the failed CI job that runs semantic-release.
If you are not sure how to resolve this, here is some links that can help you:
If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.
Invalid npm token.
The npm token configured in the NPM_TOKEN
environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/
.
If you are using Two-Factor Authentication, make configure the auth-only
level is supported. semantic-release cannot publish with the default auth-and-writes
level.
Please make sure to set the NPM_TOKEN
environment variable in your CI with the exact value of the npm token.
Good luck with your project ✨
Your semantic-release bot 📦🚀
It’s not clear what semantic-release is complaining about, because this works just fine.
Replaced the NPM Token just to be sure, closing.