Create the "2_Non_Volatile_Memories" schematic sheet

[andrempmattos]

Create SD card circuits (slot SD, capacitors and pull-up/down resistors) e NOR Flash Memory (memory, capacitors and pull-up/down resistors).

Nor Flash Memory: (MT25QL01GBBB8ESF)

From the datasheet (page 79):

"Normal precautions must be taken for supply line decoupling to stabilize the VCC supply. Each device in a system should have the VCC line decoupled by a suitable capacitor (typically 100nF) close to the package pins. At power-down, when VCC drops from the operating voltage to below the power-on-reset threshold voltage shown here, all operations are disabled and the device does not respond to any command."

Reference design: Technical Note - PCB Layout Design Guidelines

SD Card: (WM12834CT-ND)