config get only partly recognized
Closed this issue · 2 comments
drmaex commented
Hello and thank you for the project, everything works almost as expected but stable :)
My problem is, that the configuration file i am providing only gets party recognized.
Sorry i cant figure out how to create nice code view block....
I am observing the strange behavior that the config gets syntactically accepted, my mqtt main prefix is also working but the SmlListEntry's hex ID get the COM port prefixed instead of my configured subtopic
here is my configuration
logging:
level: INFO # Log level
file: sml2mqtt.log # Log file path (absolute or relative to config file)
mqtt:
connection:
client id: sml2mqtt
host: mymqtthost
port: myport
user: 'myuser'
password: 'mypass'
tls: false
tls insecure: false
topic prefix: /max
defaults:
qos: 0 # Default value for QOS if no other QOS value in the config entry is set
retain: false # Default value for retain if no other retain value in the config entry is set
last will:
topic: status
general:
Wh in kWh: true # Automatically convert Wh to kWh
republish after: 120 # Republish automatically after this time (if no other filter configured)
ports:
- url: /dev/ttyUSB0 # Device path
timeout: 3 # Seconds after which a timeout will be detected (default=3)
devices: # Device configuration by ID or url
0a0149545200034bfc38:
mqtt:
topic: strom
skip: # OBIS codes (HEX) of values that will not be published (optional)
- 0100600100ff
values: # Special configurations for each of the values (optional)
0100100700ff:
mqtt: # Mqtt config for this entry (optional)
topic: 0100100700ff
filters: # Refresh options for the value (optional)
- perc: 15
0100010800ff:
mqtt:
topic: 0100010800ff
filters:
- every: 120and here is part of the output of the analysis run
[2023-02-05 14:12:23,195] [sml.ttyUSB0 ] INFO | <SmlMessage>
[2023-02-05 14:12:23,195] [sml.ttyUSB0 ] INFO | transaction_id: 1c4d6303002bd02f
[2023-02-05 14:12:23,196] [sml.ttyUSB0 ] INFO | group_no : 0
[2023-02-05 14:12:23,196] [sml.ttyUSB0 ] INFO | abort_on_error: 0
[2023-02-05 14:12:23,196] [sml.ttyUSB0 ] INFO | message_body <SmlOpenResponse>
[2023-02-05 14:12:23,196] [sml.ttyUSB0 ] INFO | codepage : None
[2023-02-05 14:12:23,197] [sml.ttyUSB0 ] INFO | client_id : None
[2023-02-05 14:12:23,197] [sml.ttyUSB0 ] INFO | req_file_id: 000000000371e7d6
[2023-02-05 14:12:23,197] [sml.ttyUSB0 ] INFO | server_id : 0a0149545200034bfc38
[2023-02-05 14:12:23,197] [sml.ttyUSB0 ] INFO | ref_time : 57796578
[2023-02-05 14:12:23,198] [sml.ttyUSB0 ] INFO | sml_version: None
[2023-02-05 14:12:23,198] [sml.ttyUSB0 ] INFO | crc16 : 55028
[2023-02-05 14:12:23,198] [sml.ttyUSB0 ] INFO | <SmlMessage>
[2023-02-05 14:12:23,199] [sml.ttyUSB0 ] INFO | transaction_id: 1c4d6303002bd030
[2023-02-05 14:12:23,199] [sml.ttyUSB0 ] INFO | group_no : 0
[2023-02-05 14:12:23,199] [sml.ttyUSB0 ] INFO | abort_on_error: 0
[2023-02-05 14:12:23,199] [sml.ttyUSB0 ] INFO | message_body <SmlGetListResponse>
[2023-02-05 14:12:23,200] [sml.ttyUSB0 ] INFO | client_id : None
[2023-02-05 14:12:23,200] [sml.ttyUSB0 ] INFO | server_id : 0a0149545200034bfc38
[2023-02-05 14:12:23,200] [sml.ttyUSB0 ] INFO | list_name : 0100620affff
[2023-02-05 14:12:23,200] [sml.ttyUSB0 ] INFO | act_sensor_time : 57796578
[2023-02-05 14:12:23,201] [sml.ttyUSB0 ] INFO | val_list:
[2023-02-05 14:12:23,201] [sml.ttyUSB0 ] INFO | <SmlListEntry>
[2023-02-05 14:12:23,201] [sml.ttyUSB0 ] INFO | obis : 010060320101 (1-0:96.50.1*1)
[2023-02-05 14:12:23,201] [sml.ttyUSB0 ] INFO | status : None
[2023-02-05 14:12:23,201] [sml.ttyUSB0 ] INFO | val_time : None
[2023-02-05 14:12:23,202] [sml.ttyUSB0 ] INFO | unit : None
[2023-02-05 14:12:23,202] [sml.ttyUSB0 ] INFO | scaler : None
[2023-02-05 14:12:23,202] [sml.ttyUSB0 ] INFO | value : ITR
[2023-02-05 14:12:23,202] [sml.ttyUSB0 ] INFO | value_signature: None
[2023-02-05 14:12:23,203] [sml.ttyUSB0 ] INFO | <SmlListEntry>
[2023-02-05 14:12:23,203] [sml.ttyUSB0 ] INFO | obis : 0100600100ff (1-0:96.1.0*255)
[2023-02-05 14:12:23,203] [sml.ttyUSB0 ] INFO | status : None
[2023-02-05 14:12:23,203] [sml.ttyUSB0 ] INFO | val_time : None
[2023-02-05 14:12:23,203] [sml.ttyUSB0 ] INFO | unit : None
[2023-02-05 14:12:23,204] [sml.ttyUSB0 ] INFO | scaler : None
[2023-02-05 14:12:23,204] [sml.ttyUSB0 ] INFO | value : 0a0149545200034bfc38
[2023-02-05 14:12:23,204] [sml.ttyUSB0 ] INFO | value_signature: None
[2023-02-05 14:12:23,204] [sml.ttyUSB0 ] INFO | <SmlListEntry>
[2023-02-05 14:12:23,205] [sml.ttyUSB0 ] INFO | obis : 0100010800ff (1-0:1.8.0*255)
[2023-02-05 14:12:23,205] [sml.ttyUSB0 ] INFO | status : 1835268
[2023-02-05 14:12:23,205] [sml.ttyUSB0 ] INFO | val_time : None
[2023-02-05 14:12:23,205] [sml.ttyUSB0 ] INFO | unit : 30
[2023-02-05 14:12:23,206] [sml.ttyUSB0 ] INFO | scaler : -1
[2023-02-05 14:12:23,206] [sml.ttyUSB0 ] INFO | value : 32410582
[2023-02-05 14:12:23,206] [sml.ttyUSB0 ] INFO | value_signature: None
[2023-02-05 14:12:23,206] [sml.ttyUSB0 ] INFO | -> 3241058.2Wh (Zählerstand Total)
[2023-02-05 14:12:23,206] [sml.ttyUSB0 ] INFO | <SmlListEntry>
[2023-02-05 14:12:23,207] [sml.ttyUSB0 ] INFO | obis : 0100100700ff (1-0:16.7.0*255)
[2023-02-05 14:12:23,207] [sml.ttyUSB0 ] INFO | status : None
[2023-02-05 14:12:23,207] [sml.ttyUSB0 ] INFO | val_time : None
[2023-02-05 14:12:23,207] [sml.ttyUSB0 ] INFO | unit : 27
[2023-02-05 14:12:23,208] [sml.ttyUSB0 ] INFO | scaler : 0
[2023-02-05 14:12:23,208] [sml.ttyUSB0 ] INFO | value : 278
[2023-02-05 14:12:23,208] [sml.ttyUSB0 ] INFO | value_signature: None
[2023-02-05 14:12:23,208] [sml.ttyUSB0 ] INFO | -> 278W (aktuelle Wirkleistung)
[2023-02-05 14:12:23,208] [sml.ttyUSB0 ] INFO | list_signature : None
[2023-02-05 14:12:23,209] [sml.ttyUSB0 ] INFO | act_gateway_time: None
[2023-02-05 14:12:23,209] [sml.ttyUSB0 ] INFO | crc16 : 19136
[2023-02-05 14:12:23,209] [sml.ttyUSB0 ] INFO | <SmlMessage>
did I make a mistake in the configuraton? i would expect my mqtt topic to be /max/strom/0100100700ff and so on without the COM port
Thank you
spacemanspiff2007 commented
Try adding 'device id obis' under 'general'.
Like this:
general:
device id obis: '0100600100ff'drmaex commented
thank you for the fast response. now it works and I get expected mqtt topics.