error: redefinition of 'class MAX30105'

[kamilah2520]

When I compile the code for my MAX30102, with its .cpp and .h files, I get the following error:

In file included from C:\Users\USUARIO\Documents\Arduino\hr-spo2-max30102\hr-spo2-max30102.ino:6:0: MAX30105.h:52:7: error: redefinition of 'class MAX30105' class MAX30105 { ^~~~~~~~ In file included from C:\Users\USUARIO\Documents\Arduino\hr-spo2-max30102\hr-spo2-max30102.ino:2:0: C:\Users\USUARIO\Documents\Arduino\libraries\SparkFun_MAX3010x_Pulse_and_Proximity_Sensor_Library\src/MAX30105.h:46:7: note: previous definition of 'class MAX30105' class MAX30105 { ^~~~~~~~ exit status 1 redefinition of 'class MAX30105'

These are the header files...
MAX30105.h
`
#pragma once

#if (ARDUINO >= 100)
#include "Arduino.h"
#else
#include "WProgram.h"
#endif

#include <Wire.h>

#define MAX30105_ADDRESS 0x57 //7-bit I2C Address
//Note that MAX30102 has the same I2C address and Part ID

#define I2C_SPEED_STANDARD 100000
#define I2C_SPEED_FAST 400000

//Define the size of the I2C buffer based on the platform the user has
#if defined(AVR_ATmega328P) || defined(AVR_ATmega168)

//I2C_BUFFER_LENGTH is defined in Wire.H
#define I2C_BUFFER_LENGTH BUFFER_LENGTH

#elif defined(SAMD21G18A)

//SAMD21 uses RingBuffer.h
#define I2C_BUFFER_LENGTH SERIAL_BUFFER_SIZE

#else

//The catch-all default is 32
#define I2C_BUFFER_LENGTH 32

#endif

#ifndef MAX30105_H
#define MAX30105_H

#include "Arduino.h"
class MAX30105 {

public:
MAX30105(void);

boolean begin(TwoWire &wirePort = Wire, uint32_t i2cSpeed = I2C_SPEED_STANDARD, uint8_t i2caddr = MAX30105_ADDRESS);

uint32_t getRed(void); //Returns immediate red value
uint32_t getIR(void); //Returns immediate IR value
uint32_t getGreen(void); //Returns immediate green value
bool safeCheck(uint8_t maxTimeToCheck); //Given a max amount of time, check for new data

// Configuration
void softReset();
void shutDown();
void wakeUp();

void setLEDMode(uint8_t mode);

void setADCRange(uint8_t adcRange);
void setSampleRate(uint8_t sampleRate);
void setPulseWidth(uint8_t pulseWidth);

void setPulseAmplitudeRed(uint8_t value);
void setPulseAmplitudeIR(uint8_t value);
void setPulseAmplitudeGreen(uint8_t value);
void setPulseAmplitudeProximity(uint8_t value);

void setProximityThreshold(uint8_t threshMSB);

//Multi-led configuration mode (page 22)
void enableSlot(uint8_t slotNumber, uint8_t device); //Given slot number, assign a device to slot
void disableSlots(void);

// Data Collection

//Interrupts (page 13, 14)
uint8_t getINT1(void); //Returns the main interrupt group
uint8_t getINT2(void); //Returns the temp ready interrupt
void enableAFULL(void); //Enable/disable individual interrupts
void disableAFULL(void);
void enableDATARDY(void);
void disableDATARDY(void);
void enableALCOVF(void);
void disableALCOVF(void);
void enablePROXINT(void);
void disablePROXINT(void);
void enableDIETEMPRDY(void);
void disableDIETEMPRDY(void);

//FIFO Configuration (page 18)
void setFIFOAverage(uint8_t samples);
void enableFIFORollover();
void disableFIFORollover();
void setFIFOAlmostFull(uint8_t samples);

//FIFO Reading
uint16_t check(void); //Checks for new data and fills FIFO
uint8_t available(void); //Tells caller how many new samples are available (head - tail)
void nextSample(void); //Advances the tail of the sense array
uint32_t getFIFORed(void); //Returns the FIFO sample pointed to by tail
uint32_t getFIFOIR(void); //Returns the FIFO sample pointed to by tail
uint32_t getFIFOGreen(void); //Returns the FIFO sample pointed to by tail

uint8_t getWritePointer(void);
uint8_t getReadPointer(void);
void clearFIFO(void); //Sets the read/write pointers to zero

//Proximity Mode Interrupt Threshold
void setPROXINTTHRESH(uint8_t val);

// Die Temperature
float readTemperature();
float readTemperatureF();

// Detecting ID/Revision
uint8_t getRevisionID();
uint8_t readPartID();

// Setup the IC with user selectable settings
void setup(byte powerLevel = 0x1F, byte sampleAverage = 4, byte ledMode = 3, int sampleRate = 400, int pulseWidth = 411, int adcRange = 4096);

// Low-level I2C communication
uint8_t readRegister8(uint8_t address, uint8_t reg);
void writeRegister8(uint8_t address, uint8_t reg, uint8_t value);

private:
TwoWire *_i2cPort; //The generic connection to user's chosen I2C hardware
uint8_t _i2caddr;

//activeLEDs is the number of channels turned on, and can be 1 to 3. 2 is common for Red+IR.
byte activeLEDs; //Gets set during setup. Allows check() to calculate how many bytes to read from FIFO

uint8_t revisionID;

void readRevisionID();

void bitMask(uint8_t reg, uint8_t mask, uint8_t thing);

#define STORAGE_SIZE 4 //Each long is 4 bytes so limit this to fit on your micro
typedef struct Record
{
uint32_t red[STORAGE_SIZE];
uint32_t IR[STORAGE_SIZE];
uint32_t green[STORAGE_SIZE];
byte head;
byte tail;
} sense_struct; //This is our circular buffer of readings from the sensor

sense_struct sense;

};

#endif`