sparkfun/SparkFun_u-blox_GNSS_Arduino_Library

Issues

• I can't understand how RTK works

  #231 opened a year ago by Nocentinia
  5

• SPI interface is not working on Tracker SOM

  #229 opened a year ago by TanayRayav
  2

• Controlling power completely with EXTINT

  #228 opened a year ago by gauteh
  3

• How to send RTK corrections from base to rover via I2C?

  #219 opened a year ago by dizcza
  9

• Increase delay between measurement

  #226 opened a year ago by yriouvortex
  4

• base station location through rtcm data

  #227 opened a year ago by jasvinder1079
  3

• Ability to set Position Accuracy

  #223 opened a year ago by cyclops1982
  3

• EXAMPLE12_USEUART - ZED F9P COMMUNICATION ISSUES WITH ARDUINO MEGA USING UART 1

  #222 opened a year ago by Lucas0rt
  4

• pushRawData make input data const

  #221 opened a year ago by dizcza
  1

• Polling data frequency not correct

  #220 opened a year ago by Nick-C130
  1

• In getProtocolVersion(), PayloadCfg out of bounds

  #217 opened a year ago by xuyaozhong
  1

• overflow warning

  #216 opened 2 years ago by hoka83
  0

• gnss modules and ATtiny chips

  #215 opened 2 years ago by hoka83
  6

• how to connext u-blox max-10m with antinna and test it with SparkFun_u-blox_GNSS_Arduino_Library

  #213 opened 2 years ago by hoka83
  7

• how to connext u-blox max-10m with antinna and test it with SparkFun_u-blox_GNSS_Arduino_Library

  #214 opened 2 years ago by hoka83
  1

• How to change and save the I2C address

  #212 opened 2 years ago by dizcza
  1

• Communication fails with multiple messages

  #199 opened 2 years ago by Jakub-Nagy
  13

• [Feature Request] Add ring buffer storage for multiple ESF MEAS messages

  #179 opened 2 years ago by PaulZC
  1

• problems with BLE on Arduino GIGA

  #210 opened 2 years ago by Nocentinia
  6

• The program stops midway.

  #205 opened 2 years ago by drinkBr
  6

• Compatibility with arduino giga

  #204 opened 2 years ago by Nocentinia
  1

• [Feature Request] Controlled shutdown for Hot Start.

  #203 opened 2 years ago by Eric-FR
  5

• Fails to initialise

  #202 opened 2 years ago by StressedDave
  4

• Negative elevation in NAVSAT data?

  #201 opened 2 years ago by nicolasff
  3

• Clarify ESF_ALG and Example4_vehicleDynamics

  #197 opened 2 years ago by PaulZC
  1

• checkUblox function can't be run in a loop slower than 10 ms delay

  #198 opened 2 years ago by YannickRiou
  1

• NMEA packets are output at different rates when interfaced over I2C with Sam-M8Q

  #196 opened 3 years ago by mpvlad
  5

• Power Save Mode on NEO-M9N

  #195 opened 3 years ago by caioorafael
  1

• Using ZOE-M8Q with active antenna

  #194 opened 3 years ago by Savaesc
  1

• Ublox Neo-M9N module with UART or I2C?

  #193 opened 3 years ago by RodEnry
  3

• Arduino Due slower update rate than Uno over I2C

  #191 opened 3 years ago by smithan7
  7

• GPS Accuracy and Constallations

  #192 opened 3 years ago by jan5650
  1

• [Feature Request] enableGNSS - using combined constellations

  #188 opened 3 years ago by hybridOL
  7

• data processing time

  #187 opened 3 years ago by Nocentinia
  5

• Enable ODO in callback example 2

  #185 opened 3 years ago by PaulZC
  0

• Add NEO-M8P Moving Base example

  #184 opened 3 years ago by PaulZC
  0

• Note that the MSL model is a gridded EGM96 geoid

  #182 opened 3 years ago by drf5n
  1

• Baudrate

  #173 opened 3 years ago by jan5650
  4

• How to check satellite count?

  #181 opened 3 years ago by Savaesc
  1

• I would like to get the magnetometer values.

  #180 opened 3 years ago by jinhyeongRepo
  1

• SparkFun GNSS Receiver Breakout - MAX-M10S issues with your GPS library

  #178 opened 3 years ago by roblatour
  3

• Lifetime Limit in specified days

  #177 opened 3 years ago by jan5650
  1

• Issue with myGNSS.getVal8

  #172 opened 3 years ago by PaulZC
  4

• .begin fails on Thing Plus RP2040 - need to edit pins_arduino.h

  #176 opened 3 years ago by StressedDave
  10

• UBX-NAV-SIG

  #171 opened 3 years ago by baldvinhansson
  4

• Does the MAX-M10S support geofence ?

  #170 opened 3 years ago by JimKruk
  1

• getRXMSFRBX and getRXMRAWX contain odd call to TIM related functionality

  #167 opened 3 years ago by FerdinandvHagen
  3

• ZED-F9R issues

  #166 opened 3 years ago by hannsadrian
  5

• Latency upon working

  #162 opened 3 years ago by jan5650
  6

• Help wanted: Cant get my neo-m8p to print out rtcm correction data

  #160 opened 3 years ago by JacobWilkins
  4