My camera and fingerprint stopped working after a slight fall
Opened this issue · 4 comments
Gidfactor commented
My camera and fingerprint stopped working after a slight fall
sperglord8008s commented
try opening it up and reseating the connector
maybe the ribbon cable came loose
Gidfactor commented
I did but.. I think I have to flash the phone...
I have soo many files and settings on it.. I can't afford to flash it...
Cheers...
Disclaimer: This message and any attachment hereto is intended solely for
the use of the designated recipient(s) and their appointed delegates and may
contain confidential information. Any unauthorized use, disclosure, copying,
or distribution of its contents is strictly prohibited. If you have received
this message in error, please destroy it and advise the sender immediately.
Thank-you for your cooperation.
Mr Gideon Kojo Agyare
REAP AQUA SOLAR LIMITED
PRESIDENT/CEO/FOUNDER
…On Tue, May 28, 2024, 4:22 PM sperglord8008s ***@***.***> wrote:
try opening it up and reseating the connector
maybe the ribbon cable came loose
—
Reply to this email directly, view it on GitHub
<#1 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BCB377QB4GGHKJ4OUPAU43TZESVM3AVCNFSM6AAAAABIH7EREKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZVGY3DAMRSGU>
.
You are receiving this because you authored the thread.Message ID:
<sperglord8008s/Blackview-BV9900-Pro-Factory-Mode-APK-FLIR-Test--Decompiled/issues/1/2135660225
@github.com>
sperglord8008s commented
there is a good 4PDA thread for blackview, you just need to translate it from russian using google or whatever.
its pretty straight forward to flash or root, just follow the steps in the thread
goodluck bro :)
https://4pda.to/forum/index.php?showtopic=977351
as a side note my BV9900 died from sweat getting into the phone because the adhesive that joins the camera glass cover to the phone body was garbage. "rugged"
I would not recommend Blackview to anybody! I still use my Nexus 6P which i've dropped many many many times, sweaty pockets etc etc. no problem! keeps on working.
Blackview...not so much :(
Gidfactor commented
OK thank you so much for your assistance and support..
On Sat, Jun 1, 2024, 12:57 AM sperglord8008s ***@***.***>
wrote:
… there is a good 4PDA thread for blackview, you just need to translate it
from russian using google or whatever. goodluck bro :)
https://4pda.to/forum/index.php?showforum=1058
On Wed, 29 May 2024 at 05:12, Gidfactor ***@***.***> wrote:
> I did but.. I think I have to flash the phone...
>
> I have soo many files and settings on it.. I can't afford to flash it...
> Cheers...
>
> Disclaimer: This message and any attachment hereto is intended solely
for
> the use of the designated recipient(s) and their appointed delegates and
> may
> contain confidential information. Any unauthorized use, disclosure,
> copying,
> or distribution of its contents is strictly prohibited. If you have
> received
> this message in error, please destroy it and advise the sender
> immediately.
> Thank-you for your cooperation.
>
>
> Mr Gideon Kojo Agyare
>
> REAP AQUA SOLAR LIMITED
>
> PRESIDENT/CEO/FOUNDER
>
> On Tue, May 28, 2024, 4:22 PM sperglord8008s ***@***.***>
> wrote:
>
> > try opening it up and reseating the connector
> > maybe the ribbon cable came loose
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#1 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/BCB377QB4GGHKJ4OUPAU43TZESVM3AVCNFSM6AAAAABIH7EREKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZVGY3DAMRSGU>
>
> > .
> > You are receiving this because you authored the thread.Message ID:
> >
>
<sperglord8008s/Blackview-BV9900-Pro-Factory-Mode-APK-FLIR-Test--Decompiled/issues/1/2135660225
>
> > @github.com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#1 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AM5OWKCSFJCZOGCYU7ZJUMDZETJK5AVCNFSM6AAAAABIH7EREKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZVHEZTOOJWGI>
> .
> You are receiving this because you commented.Message ID:
>
<sperglord8008s/Blackview-BV9900-Pro-Factory-Mode-APK-FLIR-Test--Decompiled/issues/1/2135937962
> @github.com>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BCB377XODIWHXK2QKLGNVODZFEMALAVCNFSM6AAAAABIH7EREKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNBTGE4DIOBWGE>
.
You are receiving this because you authored the thread.Message ID:
<sperglord8008s/Blackview-BV9900-Pro-Factory-Mode-APK-FLIR-Test--Decompiled/issues/1/2143184861
@github.com>