Bluetooth not working with Taobao card

Question

Bluetooth not working with Taobao card

MrJosu opened this issue 6 years ago · 19 comments

Hi, i successfully installed wifi card from Taobao, but i cannot manage to run bluetooth. Any advice in this?

Answer 1 · 2018-08-12T05:53:59.000Z

Please provide your wifi card model or the link of the card.

Answer 2 · 2018-08-12T08:37:47.000Z

@stevezhengshiqi Card model is BCM943602CS and bought it from https://item.taobao.com/item.htm?_u=u32prbov071e&id=532197802538

Answer 3 · 2018-08-12T10:45:03.000Z

Great. You are using the same model as mine. Did you solder D+ and D- wire into pin4 and 5 in WLAN_LTE slot? If you have done the solder thing, please check the Device Manager in Windows to confirm your solder process.

Answer 4 · 2018-08-12T10:50:38.000Z

Yes, wifi is working, but bluetooth no chance :(

Answer 5 · 2018-08-12T11:09:18.000Z

Did you solder your D+ and D- wire, like the picture below?

Answer 6 · 2018-08-12T11:39:07.000Z

yes, right. I will show you image - https://yadi.sk/i/RBLk0UDG3a9j6T

Answer 7 · 2018-08-12T11:50:52.000Z

It seems OK. I will assume your BT is connected. Go to EFI/CLOVER/ACPI/patched and replace SSDT-USB.aml with the one below.
SSDT-USB.aml.zip

UPDATE: The newest EFI release uses a new USB injection method. Please replace the following archive with the one in /EFI/CLOVER/kexts/Other/
USBPorts.kext.zip

Answer 8 · 2018-08-12T11:59:59.000Z

Man, you magician! Thank you so much, i can enjoy my airpods!!! yahoo

Answer 9 · 2018-08-12T12:02:09.000Z

I think you need mention this in manual :) i know few people bought this thing. Now need to find best place for antennas, to get full speed, now its only 40 perc of maximum

Answer 10 · 2018-08-12T12:11:11.000Z

Great News! I will update README.

For the antennas, I personally recommend to stick them behind the trackpad(under the battery). They have to be sticked on the top of the trackpad; otherwise the trackpad can't be clicked.

Answer 11 · 2018-08-12T12:14:21.000Z

I stick them under, maybe they facing wrong way. If you will have option and you will open your laptop lid please make picture how you mount them. I with friends help was trying solder them 3 times :D i think we something wrong

Answer 12 · 2018-08-12T12:15:21.000Z

Another think. I can update bios with no issues?

Answer 13 · 2018-08-12T12:22:26.000Z

I can share my messy photo of the laptop. The wires are carefully arranged after taking this photo.

For the BIOS, I amn't one hundred percent sure that there's no issue. But theoretically, it's safe.

Answer 14 · 2018-08-12T12:25:01.000Z

Only one difference, i have 3 antennas :) What you done with your heatsink?

Answer 15 · 2018-08-12T12:29:16.000Z

I have 3 antennas too, and one of them is shorter. It is situated in the middle of the trackpad.

Answer 16 · 2018-08-12T12:44:05.000Z

Lol, i was blind

Answer 17 · 2018-10-01T21:31:16.000Z

I ordered a Xiaomi Notebook Pro for hackintoshing. I heard that the default Intel wifi chip can not be replaced but instead the second M.2 slot can be used to insert a Broadcom chip. I found this guide which uses a BCM94352Z and a E to M Key Adapter to use internal wifi with the hackintosh. However, it is said that Bluetooth does not work.

Now I have found this thread and have two questions:
(1) Does the BCM943602CS fit into the M.2 without any adapter? If not, what is the difference to BCM94352Z?
(2) If I have the BCM943602CS inserted into the M.2 slot, what exactly do I have to do to enable Bluetooth?

Thanks in advance!

Answer 18 · 2019-02-18T07:44:16.000Z

I replace SSDT-USB.aml,but i can't use BT.
I can look my BT in usb of system report but it's No information found in BT of system report.

Answer 19 · 2020-10-21T09:37:57.000Z

which is color the positive cable and which is the negative one?