ChangeLogo boot loop
Opened this issue · 1 comments
Hey @superdavex . First off, I'd like to thank you for this awesome code! I was able to downgrade my AX100 to 1.02.06. I then installed your CautionDisable. So far, so good. I used the batch file to edit the photo and load my USB stick with the three files.
When I plug it into the head unit, it takes a second to recognize, and then the screen is wiped. It looks like its fading to white, only momentarily. Then the Sony logo reappears. At this point, the headunit starts up as usual but there is no audio. I have to press the reset button to re-enable audio.
The boot logo never changes. I've tried using 3 different images as well as a different USB stick. Have you seen this before?
This is the same thing that has happened to me as well. It seems to never upload the new file from the USB.
When I am programming the new file I do get a few "warnings" from the CMD which I do not know if are the source of the issue (See Below)
Enter the 800x480 image input file name: TB2.jpeg
TB2.jpeg JPEG 2560x1600 2560x1600+0+0 8-bit sRGB 284250B 0.047u 0:00.059
TB2.jpeg=>tmpoutput.bgra JPEG 2560x1600=>800x480 800x480+0+0 8-bit sRGB 1536000B 0.031u 0:00.049
convert: UnableToOpenConfigureFile colors.xml' @ warning/configure.c/GetConfigureOptions/714. convert: UnableToOpenConfigureFile magic.xml' @ warning/configure.c/GetConfigureOptions/714.
1 file(s) copied.
convert: UnableToOpenConfigureFile `magic.xml' @ warning/configure.c/GetConfigureOptions/714.
Image conversion complete.
Enter the drive letter to copy files to:g
g
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
usbexecute, flash_erase, and newlogo.img have been copied. Insert usb stick into radio. Radio will reboot when complete. Remove the drive as soon as it reboots.