CarND-Path-Planning-Project

Self-Driving Car Engineer Nanodegree Program 路径规划很有趣！！！

扩展阅读：

1.Path planning in environments of different complexity https://www.mathworks.com/help/robotics/examples/path-planning-in-environments-of-difference-complexity.html;jsessionid=776aa4482622d72d90e2dc900187

2.Robot motion Planning: http://ais.informatik.uni-freiburg.de/teaching/ss11/robotics/slides/18-robot-motion-planning.pdf

3.Robotic Path Planning: http://ais.informatik.uni-freiburg.de/teaching/ss10/robotics/slides/16-pathplanning.pdf

4.what is the difference between path planning and motion planning: https://robotics.stackexchange.com/questions/8302/what-is-the-difference-between-path-planning-and-motion-planning

5.C++Debugging Strategies, Tips, and Gotchas: https://www.cprogramming.com/debugging/debugging_strategy.html

6.Path Planning for Collision Avoidance Maneuver https://www.researchgate.net/publication/267596342_Path_Planning_for_Collision_Avoidance_Maneuver

7.Optimal Trajectory Planning for Glass-Handing Robot Based on Execution Time Acceleration and Jerk: https://www.hindawi.com/journals/jr/2016/9329131/

8.Optimal Trajectory Generation for Dynamic Street Scenarios in a Frenet Frame: https://www.semanticscholar.org/paper/Optimal-trajectory-generation-for-dynamic-street-in-Werling-Ziegler/f95577df76d3a78de71ff0ced34140708bc3e2b4

9.Udacity CS373: Programming a Robotic Car Unit 4: Motion: https://www.udacity.com/file?file_key=agpzfnVkYWNpdHl1ckcLEgZDb3Vyc2UiBWNzMzczDAsSCUNvdXJzZVJldiIHZmViMjAxMgwLEgRVbml0GIHQDwwLEgxBdHRhY2hlZEZpbGUYwYUTDA

10.Safe Motion Planning for Autonomous Driving https://wesscholar.wesleyan.edu/cgi/viewcontent.cgi?referer=&httpsredir=1&article=1856&context=etd_hon_theses

11.Local and Global Path Generation for Autonomous Vehicles Using Splines http://www.scielo.org.co/pdf/inge/v21n2/v21n2a05.pdf

12.另一位学生的解决方案： https://medium.com/@mohankarthik/path-planning-in-highways-for-an-autonomous-vehicle-242b91e6387d

13.Real-time motion planning methods for autonomous on-road driving: State-of-the-art and future research directions https://www.sciencedirect.com/science/article/pii/S0968090X15003447

14.motion planning和path planning的区别： https://robotics.stackexchange.com/questions/8302/what-is-the-difference-between-path-planning-and-motion-planning?answertab=active#tab-top

15.轨迹聚合 trajectory clustering for motion prediction： http://video.udacity-data.com.s3.amazonaws.com/topher/2017/July/5978c2c6_trajectory-clustering/trajectory-clustering.pdf

16.汽车的运动学模型： https://blog.csdn.net/adamshan/article/details/78696874

17.A comparative study of multiple-model algorithms for maneuvering target tracking： https://d17h27t6h515a5.cloudfront.net/topher/2017/June/5953fc34_a-comparative-study-of-multiple-model-algorithms-for-maneuvering-target-tracking/a-comparative-study-of-multiple-model-algorithms-for-maneuvering-target-tracking.pdf

18.Optimal Trajectory Generation For Dynamic Street Scenarios In A Frenet Frame http://video.udacity-data.com.s3.amazonaws.com/topher/2017/July/595fd482_werling-optimal-trajectory-generation-for-dynamic-street-scenarios-in-a-frenet-frame/werling-optimal-trajectory-generation-for-dynamic-street-scenarios-in-a-frenet-frame.pdf

19.Intention-Net: Integrating Planning and Deep Learning for Goal-Directed Autonomous Navigation： https://arxiv.org/abs/1710.05627

20.Learning to Navigate in Cities Without a Map： https://arxiv.org/abs/1804.00168

21.A Look at Motion Planning for Autonomous Vehicles at an Intersection ： https://arxiv.org/abs/1806.07834

22.DeepTraffic: Crowdsourced Hyperparameter Tuning of Deep Reinforcement Learning Systems for Multi-Agent Dense Traffic Navigation https://arxiv.org/abs/1801.02805

项目概述：

运用C++实现一个path planner使车辆在三车道高速上尽量快速驾驶并通过优达学城模拟器模拟。

Simulator.

You can download the Term3 Simulator which contains the Path Planning Project from the [releases tab (https://github.com/udacity/self-driving-car-sim/releases/tag/T3_v1.2).

Goals

In this project your goal is to safely navigate around a virtual highway with other traffic that is driving +-10 MPH of the 50 MPH speed limit. You will be provided the car's localization and sensor fusion data, there is also a sparse map list of waypoints around the highway. The car should try to go as close as possible to the 50 MPH speed limit, which means passing slower traffic when possible, note that other cars will try to change lanes too. The car should avoid hitting other cars at all cost as well as driving inside of the marked road lanes at all times, unless going from one lane to another. The car should be able to make one complete loop around the 6946m highway. Since the car is trying to go 50 MPH, it should take a little over 5 minutes to complete 1 loop. Also the car should not experience total acceleration over 10 m/s^2 and jerk that is greater than 10 m/s^3.

The map of the highway is in data/highway_map.txt

Each waypoint in the list contains [x,y,s,dx,dy] values. x and y are the waypoint's map coordinate position, the s value is the distance along the road to get to that waypoint in meters, the dx and dy values define the unit normal vector pointing outward of the highway loop.

The highway's waypoints loop around so the frenet s value, distance along the road, goes from 0 to 6945.554.

Basic Build Instructions

Clone this repo.
Make a build directory: mkdir build && cd build
Compile: cmake .. && make
Run it: ./path_planning.

Here is the data provided from the Simulator to the C++ Program

Main car's localization Data (No Noise)

["x"] The car's x position in map coordinates

["y"] The car's y position in map coordinates

["s"] The car's s position in frenet coordinates

["d"] The car's d position in frenet coordinates

["yaw"] The car's yaw angle in the map

["speed"] The car's speed in MPH

Previous path data given to the Planner

//Note: Return the previous list but with processed points removed, can be a nice tool to show how far along the path has processed since last time.

["previous_path_x"] The previous list of x points previously given to the simulator

["previous_path_y"] The previous list of y points previously given to the simulator

Previous path's end s and d values

["end_path_s"] The previous list's last point's frenet s value

["end_path_d"] The previous list's last point's frenet d value

Sensor Fusion Data, a list of all other car's attributes on the same side of the road. (No Noise)

["sensor_fusion"] A 2d vector of cars and then that car's [car's unique ID, car's x position in map coordinates, car's y position in map coordinates, car's x velocity in m/s, car's y velocity in m/s, car's s position in frenet coordinates, car's d position in frenet coordinates.

Details

The car uses a perfect controller and will visit every (x,y) point it recieves in the list every .02 seconds. The units for the (x,y) points are in meters and the spacing of the points determines the speed of the car. The vector going from a point to the next point in the list dictates the angle of the car. Acceleration both in the tangential and normal directions is measured along with the jerk, the rate of change of total Acceleration. The (x,y) point paths that the planner recieves should not have a total acceleration that goes over 10 m/s^2, also the jerk should not go over 50 m/s^3. (NOTE: As this is BETA, these requirements might change. Also currently jerk is over a .02 second interval, it would probably be better to average total acceleration over 1 second and measure jerk from that.
There will be some latency between the simulator running and the path planner returning a path, with optimized code usually its not very long maybe just 1-3 time steps. During this delay the simulator will continue using points that it was last given, because of this its a good idea to store the last points you have used so you can have a smooth transition. previous_path_x, and previous_path_y can be helpful for this transition since they show the last points given to the simulator controller with the processed points already removed. You would either return a path that extends this previous path or make sure to create a new path that has a smooth transition with this last path.

Tips

A really helpful resource for doing this project and creating smooth trajectories was using http://kluge.in-chemnitz.de/opensource/spline/, the spline function is in a single hearder file is really easy to use.

Dependencies

cmake >= 3.5
- All OSes: click here for installation instructions
make >= 4.1
- Linux: make is installed by default on most Linux distros
- Mac: install Xcode command line tools to get make
- Windows: Click here for installation instructions
gcc/g++ >= 5.4
- Linux: gcc / g++ is installed by default on most Linux distros
- Mac: same deal as make - [install Xcode command line tools]((https://developer.apple.com/xcode/features/)
- Windows: recommend using MinGW
uWebSockets
- Run either install-mac.sh or install-ubuntu.sh.
- If you install from source, checkout to commit e94b6e1, i.e.
```
git clone https://github.com/uWebSockets/uWebSockets 
cd uWebSockets
git checkout e94b6e1
```

Editor Settings

We've purposefully kept editor configuration files out of this repo in order to keep it as simple and environment agnostic as possible. However, we recommend using the following settings:

indent using spaces
set tab width to 2 spaces (keeps the matrices in source code aligned)

Code Style

Please (do your best to) stick to Google's C++ style guide.

Project Instructions and Rubric

Note: regardless of the changes you make, your project must be buildable using cmake and make!

Call for IDE Profiles Pull Requests

Help your fellow students!

We decided to create Makefiles with cmake to keep this project as platform agnostic as possible. Similarly, we omitted IDE profiles in order to ensure that students don't feel pressured to use one IDE or another.

However! I'd love to help people get up and running with their IDEs of choice. If you've created a profile for an IDE that you think other students would appreciate, we'd love to have you add the requisite profile files and instructions to ide_profiles/. For example if you wanted to add a VS Code profile, you'd add:

/ide_profiles/vscode/.vscode
/ide_profiles/vscode/README.md

The README should explain what the profile does, how to take advantage of it, and how to install it.

Frankly, I've never been involved in a project with multiple IDE profiles before. I believe the best way to handle this would be to keep them out of the repo root to avoid clutter. My expectation is that most profiles will include instructions to copy files to a new location to get picked up by the IDE, but that's just a guess.

One last note here: regardless of the IDE used, every submitted project must still be compilable with cmake and make./

How to write a README

A well written README file can enhance your project and portfolio. Develop your abilities to create professional README files by completing this free course.

suraj-3000/Udacity-self-driving-car-engineer-P7-Highway-Driving