UEFI DXE driver status: Not loaded (0x000000000000000A)
Opened this issue · 5 comments
I get this when I open the tool
UEFI DXE driver status: Not loaded (0x000000000000000A)
I even tried manually building the 2 files
NvStrapsReBar.exe and NvStrapsReBar.ffs
still the same thing
CSM Disabled
Above 4G Decoding Enabled
C.A.M. (Clever Access Memory) Enabled
system
intel i5 9400f
asrock b 365m Phantom Gaming 4
gtx 1660 zotac dual fan
You need to update the UEFI image on your motherboard. You should follow the instructions on the project page, and make sure you go through these steps:
- download the current UEFI image from the motherboard manufacturer
- open the image in UEFITool (or similar) and add NvStrapsReBar.ffs to the image in the right location.
- flash the motherboard with the new image.
The process is not easy, so make sure you read and properly follow the instructions.
A similar situation, but different hardware.
UEFI DXE driver status: Not loaded (0x000000000000000A)
i5-8400
asus prime b360m-a (3202 bios This firmware has official support for Resize BAR)
gtx 1650
Resize BAR - ON
CSM Disabled
Above 4G Decoding Enabled
I tried to flash the modified firmware (with ffs) according to the instructions, but when I tried to flash via EZ flash 3 I got an error - Selected file is not a proper BIOS
I encountered this exact issue so I flash it using AFUDOS. not sure if it will work on your board since I did it on TUF B450M PRO GAMING.
Try this:
#61
Try this: #61
I upgraded to a modified BIOS, but the problem remained.