UEFIpatch vs ROG-MAXIMUS-XI-EXTREME-ASUS-2004 Add a description
Closed this issue · 6 comments
System
- Motherboard: ROG-MAXIMUS-XI-EXTREME-ASUS-2004
- BIOS Version: 2004
- GPU: Zotac 2080 Ti
- [ yes] CSM is turned off. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
- [ yes] 4G decoding is enabled. Make sure to confirm this in the BIOS and not with GPU-Z or similar since it can be inaccurate
- [ Issue ] UEFIPatch is applied (see Using UEFIPatch for more information). On some motherboards DSDT Patching is also needed
- [ yes] I have read Common issues (and fixes)
Description
Bios Offical file for MotherBoard:>> https://dlcdnets.asus.com/pub/ASUS/mb/BIOS/ROG-MAXIMUS-XI-EXTREME-ASUS-2004.ZIP?model=ROG%20MAXIMUS%20XI%20EXTREME
I have tried UEFItool ver 28 and the new one also I tried using mmtool the main issue is the patcher always say this error:
C:\Rebar\UEFIPatch.exe ROG-MAXIMUS-XI-EXTREME-ASUS-2004.CAP
parseImageFile: Aptio capsule signature may become invalid after image modifications
parseIntelImage: unknown flash descriptor version 0.0
parseBios: unaligned revision 2 volume
parseFile: non-empty pad-file contents will be destroyed after volume modifications
No patches can be applied to input file
even the official motherboard file without any UEFITool or MMtool, when I tried to use UEFIpatch on it was giving me the same error
I don't know what Is the cause of this issue but if there is any hope for me to have Rebar on my 2080 ti please explain to me
thank you
I don't think you need to use UEFI patch because your motherboard is not very old.
I have the exact same setup, only use NvStrapsRebar on BIOS 2004, UEFI Patch is not necessary. I have the patched BIOS still saved. Just follow https://github.com/xCuri0/ReBarUEFI/wiki/Adding-FFS-module
If it really doesn't work, I can send the BIOS file or I can help you. Just let me know. :)
i just tried adding the NvStrapsRebar to the bios and saving that as new bios then when i tried to load it from the motherboard flashing tool it said my new file is not a proper bios file;x
this is my bios file
https://dlcdnets.asus.com/pub/ASUS/mb/BIOS/ROG-MAXIMUS-XI-EXTREME-ASUS-2004.ZIP?model=ROG%20MAXIMUS%20XI%20EXTREME
I would love to test out your bios file maybe it works, been trying for a year now with no luck
Try to use BIOS Flashback on your MB. You can't flash it like a normal bios update. There is a USB port with BIOS above it. Read the manual on how to use it. I had the same problem..
Man I dont know how I can say thank you
All this time I was going into the bios setting and using their flash tool included in bios, but after reading the link above I found out that I was only missing this force load bios ---> shutdown, hold the bios button 3 sec until flash light blink and when it stops just normal boot and BOOM MAGIC all good now I need to test on some games and see myself :D
Again thank you, sir. It is one of the best online support there 💯
No problem, glad i could help :)