Issue with 'W' Command "Save color patterns" on blink(1) device
n3xta opened this issue · 1 comments
I am encountering a problem with the 'W' command, as outlined in the HID command document.
As per the given structure { 1, 'W', 0,0,0, 0,0, 0 }, this command should enable me to "Save color patterns" to Flash. Unfortunately, this command doesn't seem to function properly on my blink(1) device.
While trying to use the 'W' command to save color patterns, the command fails to execute successfully, without any visible changes or error messages in the blink(1) device, and patterns hadn't been kept after the power off.
The 'W' command is used to save the current pattern in RAM to flash.
The 'P' command changes a single color pattern line.
Please try using the command-line program blink1-tool to exercise these commands. You can see how they're implemented in the accompanying blink1-lib.c library. (specifically, the blink1_writePatternLine() and blink1_savePattern() functions)
For example:
# Change the 2nd color pattern line to #112233 with a 0.5 sec fade
blink1-tool -m 500 --rgb 112233 --setpattline 1
# Write entire pattern from RAM to flash
blink1-tool --savepattern If blink1-tool --savepattern is not done, any changes to the RAM pattern will be lost when powered off and the flash pattern gets reloaded into RAM.