1wire
There are 22 repositories under 1wire topic.
cbalint13/tinnymodbus
RS485 ModBus tiny multi-sensor module
sosprz/nettemp
Interface for controlling the temperature sensors DS18B20, supports; serial DS9097, usb DS9097U, usb DS2490, Raspberry Pi GPIO
foorschtbar/LoRaProMini
A low power LoRaWAN Node
rick51231/motorola-battery-reader
Development of open Motorola IMPRES battery reader (gen 2 batteries)
junkfix/esp32-ds18b20
Arduino Library for ESP32 DS18B20 Non Blocking Onewire RMT protocol, no dependencies
YaoFei509/18b20
使用18B20和STC15F104单片机的测温小探头
ps915/ESPEasy-1Wire-WEMOS-PCB
PCB for ESPEASY and 1Wire Sensors (WEMOS D1 mini)
ps915/1WirePCB
1Wire PCB for DS9490R/Raspberry Pi and ESPEasy 1Wire WEMOS
technosf/ESP32-Peripheral-Drivers
ESP32 Peripheral Drivers built with ESP-IDF
deg026/universalESP32mqtt
Universal ESP32 to MQTT client
Ghosty-chan/Raspi-Temp
1-Wire with RPi & PHP
mstrupp/Axela
Axela ist ein Smart Home Konzept mit dem 1Wire Bus.
pimatic/pimatic-ds18b20
ds18b20 temperature support
vrince/rpi-thermo-chick
raspberry-pi chicken thermostat 🐔🔥
aortizgu/homekit
The purpose of this project is to create a smart thermostat that controls the temperature of a house based on certain rules according to the day, time and threshold temperature. It also allows to know the record of temperatures registered during a configured time. It has a web dashboard to know the status of the system and program its behaviour and an LCD screen to know the status of the system. Users are notified by mail about fails, changes of state, etc.. Communication between devices is via wifi ethernet using mDNS(multicast dns) and DNS-SD (dns service discovery), so address configuration is not needed.
psamperl/HomeAutomation
Home Automation using Pi and OWFS
SergCh/Termometr
Термометр из старого табло очереди сбербанка (at89c2051)
stijink/temperature-sensor-ds18b20
A small script to read out the temperature of a ds18b20 temperature sensor with the raspberry pi
Tuananhy7/Pic18f4520
read ds18b20 and temperature control in the box
DarwinsBuddy/tempsense
Connect several DS18B20 1wire temperature sensors to a RaspberryPi and log their measurements or send it to a home assistant
Elektordi/temp-probe-exporter
Export Prometheus data from 1-Wire temperature sensors, using an Arduino or Linux system