bmp085
There are 31 repositories under bmp085 topic.
mikaelpatel/Arduino-TWI
Two-Wire Interface (TWI) library for Arduino
enjoyneering/BMP180
This is an Arduino library for the Bosch BMP085 & BMP180 barometric pressure & tempemperature sensor
fiskeben/bmp085
A node.js module for reading a BMP085 barometer sensor.
elmot/arduino-to-clion
Arduino-AVR -> Professional ARM project migration with CLion
bsapundzhiev/bmp085
bmp085, bmp180 linux kernel driver
AndruPol/sensor-server
nRF24LXX modbus RTU gateway
Kampi/BMP-Sensors
Python I2C driver for the Bosch Sensortec BMP family pressure sensors.
moof-moof/birdbrain
Arduino-based "autopilot" code for soaring model airplanes.
tvlad1234/pico-bmp085Driv
BMP085 library for pico-sdk
aislen404/Weather_Station
My IoT Station
eypiem/IoT-Robot-Client
Raspberry Pi implementation for an IoT robot project.
martin075/pressure
atmel studio 4.18, avr-gcc 4.8.1, atmega168, bmp085, bmp180, UART, barometric,
moof-moof/variometer-tx-rx
Code for Arduino-based transmitting variometer for soaring model airplanes
rauschenbach/bf504f_Burn
Старая сейсмостанция 2012г. Для поддержки . BF504f+ADS1282+MagicXtal. Bare metal. w/out OS
Apostrophe64/Wetterstation
Ein Arduino basierter 433MHz Funkempfänger und Funksender zur Übertragung von Messwerten wie Temperatur, Regenmenge, Wasserverbrauch usw. Ein ESP8266 stellt dabei ein Gateway zwischen dem 433MH Funknetz und einem auf einem Raspberry Pi installiertem EmonEms zur Verfügung. Gleichzeitig läuft auf dem ESP8266 ein Webserver, damit die aktuellen Messdaten auch über einen Webbrowser abgerufen werden können.
kolergy/CROPS
C.R.O.P.S. : CRoissance Optimale des Plantes en Sol. Gestion des capteurs et stockage dans CouchDB
martin075/8xDS18b20_BMP085_LCD_UART_Relay
This device (atmega328) measure temperature by DS 18b20 (18S20) - maximum 8 pcs, barometric pressure with user defined offset for relative pressure, display it on LCD 4x20, HD 44780, and send it on UART. You can set 2 thermostats - output is 2 relays
martin075/8xDS18x20_bmp085_LCD_UART
measurement temperature and barometric pressure by maximum 8x DS18b20, DS18s20 and 1x BMP085. sending data through UART, and displaying it on LCD 4x20, HD44780, Atmega168
sofienchaouch/Climed
Weather Station
the-risk-taker/bmp085-arduino-i2c-library
C++ library for BMP085 barometer for I2C communication with Arduino Wire library
AlexLamson/log-temperature
Log indoor temperature / air pressure with a raspberry to a google sheet
fichtlandsachs/weather_v2
Upload of a project for a weatherstation
lbthomsen/stm32-bmp085
STM32 driver for Bosch BMP085 pressure sensor
LionelJouin/Weather-Station
An Arduino uno weather station monitoring: temperature, humidity, pressure, air quality, rain and brightness. https://weather-station-client.azurewebsites.net/
martin075/barometer-a
Sicklinger project in AS4.18, atmel, atmega168, c, UART, barometric pressure, BMP180
moof-moof/vacuum-pump-regulator
Code for Arduino-based regulation of a vacuum bagging system.
sabas1080/uBit_BMP085
MakeCode package for the BMP085 or BMP180 sensor - beta
tvlad1234/BMP085-Cube
BMP085 Library for STM32Cube
wilmsn/BMX_sensor
An Arduino library for Bosch sensors (BMP085, BMP180, BMP280, BME280) It uses I2C address only with autodetect of address.
yelite/home-system-room-node
Monitoring the temperature of each room using BMP085