bmp388

There are 11 repositories under bmp388 topic.

libdriver/bmp388
BMP388 full function driver library for general MCU and Linux.
Language:C18 7 18
107-systems/107-Arduino-BMP388
Arduino library for interfacing with the BMP388 barometric pressure sensor which can be used for inferring altitude information.
Language:C++6 7 32
johntalton/boschIEU
Bosch Integrated Environmental Unit (bmp280 / bme280 / bme680 / bmp388/ bmp390)
Language:JavaScript6 2 13
gerryvel/NMEA2000_TPW
BoatSensor for temperatur, pressure and winddata. Windata input NMEA0183 over WLAN. All data output to NMEA2000.
Language:C4 1 110
DuePonto/BMP388-STM32-HAL
Driver for BMP388 that uses STM32_HAL libraries
Language:C3 1 22
germsb/Arduino_BMP3XX
Bosch BMP3XX sensors series library wrapper for Arduino
Language:C3 3 11
owainm713/BMP388-Python-Module
Python module to use the BMP388 pressure and temperature sensor
Language:Python3 2 00
hkoosha/homer2
Air quality monitoring on Raspberry Pi Pico, sent to Victoria Metrics, shown on Grafana: CO2, Humidity, Temperature, Volatile Organic Compounds, ..., you name it!
Language:C1 1 20
julesmanigne/SmartHome
Build a Smart Home using ESP32
Language:C++1 1 00
cornellrocketryteam/BMP388-Pico
BMP388 altimeter sensor driver for the Raspberry Pi Pico
Language:C0 0 00
pavel-perina/arduino-bmp280-minimal
Nearly minimal Arduino code to read raw sensor measurements and calibration data for BMP280 and BMP388 and separate decoder.
Language:C++1 0