capacitive-touch-sensor
There are 53 repositories under capacitive-touch-sensor topic.
j-a-g-r/esphome-capacitive-touch-panel
A DIY capacitive touch panel based on the mpr121 and esphome.
stnolting/captouch
👇 Add capacitive touch buttons to any FPGA!
wagiminator/ATtiny13-TinyTouchLight
Dimmable USB Night Light with Capacitive Touch Control
blinkcare/blink
👀 Affordable and accurate communication through blinking!
mcauser/micropython-mpr121
MicroPython driver for MPR121 capacitive touch keypads and breakout boards
vogler/SmartLock
3D printed smart lock using ESP32 via 2 AA cells, N20 geared motor driven by TB6612FNG via 9V block
alankrantas/micropython-TTP229-BSF
MicroPython ESP8266/ESP32 driver for TTP229-BSF 16-key capacitive keypad in serial interface mode
Project-Alpaca/LKP
🍌🎹 Capacitive touch slider controller for rhythm games.
ahmsville/Advanced_capacitive_touch_detection
These Arduino capacitive touch library allows advanced touch detections; such as, Double tap, Short press and Long press. Also featured in the library is a haptics controller.
SuGlider/Adafruit_ESP32S3_BOX
Arduino Adafruit compatible Library for ESP32-S3-Box device - 320x240 ST7789 TFT and TT21100 Capacitive Touch Screen
mcauser/micropython-ttp223
MicroPython examples using TTP223 capacitive touch module
nopnop2002/esp-idf-mpr121
MPR121 Capacitive Touch Driver for esp-idf
sparkfun/SparkFun_CAP1203_Arduino_Library
Arduino library for the I2C based capacitive touch slider with 3 unique touch inputs.
EXtremeExploit/KappaPad
Firmware for capacitive keypad, optimized for osu!
saulcarvalho/ClassProj-SCE-ESP32-FreeRTOS-Proj
2021. Real-time based project done for the class of Embedded Computational Systems. Implemented in an ESP32 WeMos LOLIN32 Lite with FreeRTOS.
sparkfun/AT42QT1010_Capacitive_Touch_Breakout
Breakout board for the QTouch AT42QT1010 and AT42QT1011 single capacitive sensor.
leonardosposina/led-strip-controller
A simple LED strip controller project based on Digispark ATtiny85, also using a capacitive touch sensor and a MOSFET transistor.
sparkfun/Touch_Potentiometer
The Touch Potentiometer is a collaboration between DanJulioDesigns and SparkFun Electronics. The Touch Pot allows you to easily integrate a slide potentiometer into any project that requires such an interface, such as the volume control on a stereo.
vintlabs/BananaPiano
Use an ESP32 and some bananas to make a piano!
DaAwesomeP/prox-sense
Robust and discreet capacitive proximity and touch sensors
henmill/BusinessCard_Rev_0
PCB Business Card Firmware Repo
nopnop2002/esp-idf-ttp229
TTP229 Capacitive Touch Driver for esp-idf
Project-Alpaca/LKP-FW
Collection of firmware variants for LKP board
senotrusov/arduino-capacitive-sensor-midi-input
Arduino-based capacitive sensor for touch-sensitive MIDI input
Sreyeso/GP-Game-Keypad
Capacitive touch keypad intented for General Purpose.
vintlabs/Capacitive_Touch_Lid
Capacitive Touch Button Module for ESP32-Zip
brainsmoke/matrixpad
Capacitive touch numpad
craigsdennis/adafruit-whoopy-cushion
A WhooPy Cushion using CircuitPython on an Adafruit Circuit Playground Express
jeremyrode/PicoSteamControl
Pico control for a Leisure Steam One Touch shower steamer with capacitive touch detection.
konstantinbsv/Honda-Sensor-GUI
GUI for Honda sensors project
okramovic/rgblight
capacitive sensing rgb light gesture control
peterpf/capsensor-monitor
A Python application to visualize data from capacitive touchpads.
sparkfun/Qwiic_Capacitive_Touch_Slider_CAP1203
An I2C based capacitive touch slider with three separate touch pads
LudoProvost/OrderCube
The Order Cube is a new way to order at a restaurant
MiroKeimioniemi/LED-zeppelin-embedded-code
The code running on the microcontrollers inside the gesture controlled LED Zeppelin lamp prototype, made as the final project for the 2024 Digital Fabrication Fab Academy overlay course at Aalto Fablab.