co2-sensor
There are 171 repositories under co2-sensor topic.
UncleRus/esp-idf-lib
Component library for ESP32-xx and ESP8266
tobiasschuerg/MH-Z-CO2-Sensors
Arduino imeplementation for CO2 sensors of the MH-Z series (Intelligent Infrared CO2 Module)
danielbernalb/LibreCO2
Simple CO2 meter using Arduino UNO-Mega board and popular CO2 sensors (SenseAir S8, Sensirion SCD30, Winsen MH-Z14 or 19 and Cubic CM1106). Operation modes: Normal, Calibration 400ppm, Alarm adjust and Altitud compensation adjust
Sensirion/embedded-scd
Embedded SCD Drivers for Sensirion CO2 Sensors - Download the Zip Package from the Release Page
MarcFinns/AtmoScan
Interactive air multisensor
stijnstijn/pyaranet4
A cross-platform Python interface for the Aranet4 CO₂ meter
eitherway/lollidisplay
Status display and air quality monitoring (e.g. CO2, Temperature, Humidity, ...) with an ESP32/ESP8266
miguelangelcasanova/codos
Un sistema de detección del CO2 para el aula
northeye/chissoku
A CO2 Sensor (IO-DATA UD-CO2S) Reader using USB serial.
quentinms/homebridge-aranet4
An Homebridge plugin to get data from an Aranet4
kmetz/coro2sens
Build a simple device that warns if CO₂ concentration in a room becomes a risk for COVID-19 aerosol infections.
CDFER/scd4x-CO2
A library to interface esp chips with the SCD4x CO2 sensors in the Arduino (c++) Framework.
SFeli/ESP32_CJMCU-8128
Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)
smart-tech-benin/MG811
CO2 sensor
ElDavoo/ossigenio
A monitor for air quality in study places. Project made for the subject IoT and 3D Intelligent Systems @ UniMORE 2022-2023
JsBergbau/TFACO2AirCO2ntrol_CO2Meter
Read TFA AirCO2ntrol Mini and CO2-Meter with python3
SFeli/ESP32_S8
Programs for Sensor S8 to measure CO2
Infineon/arduino-pas-co2-sensor
Arduino library for Infineon's XENSIV™ Photoacoustic Spectroscopy (PAS) CO2 miniaturized sensor
Sensirion/raspberry-pi-i2c-scd30
Raspberry-Pi I2C driver for Sensirion's SCD30 sensor
alexmrqt/micropython-sgp30
MicroPython driver for SGP30 VoC sensor
ndoornekamp/senseair_s8
Python module for reading CO2 concentration from a Senseair S8 sensor connected to a Raspberry Pi
coding-lemur/co2-meter-esp32
Measures the CO2 level in the room and gives a warning when to ventilate. All values are also distributed via MQTT.
jerr0328/co2mini
Get your CO2 Monitor into Prometheus and HomeKit
Sensirion/embedded-i2c-scd30
Sensirion I2C driver for embedded platforms for sensor SCD30
SWAT-engineering/kiwi-air-monitor
Kiwi monitor is an open source CO2/Humidity/Temperature sensor intended for monitoring the quality of the air in a room. Kiwi was created to support teachers with a notification to ventilate their classroom.
bastelgarage/co2ampel
The CO2-Ampel detects the CO2 level in the surrounding air.
oskrs111/diy-co2-monitor
DIY, low cost esp-platform based CO2 monitor ;-)
rnurgaliyev/co2meter_exporter
CO2 Meter exporter to use with Prometheus, optimised for Raspberry Pi.
Infineon/pas-co2-sensor
C++ library for Infineon's Photoacoustic Spectroscopy (PAS) XENSIV™ CO2 miniaturized sensor
itsDkiller/CO2-Sensor
Circuit that recognizes the amount of CO2 in a room. Built with the ESP8266 µC and a MHZ-19B sensor.
peter-l5/MicroPython_SCD4X
MicroPython driver for Sensirion SCD40 and SCD41. Derived from the Adafruit CircuitPython version
ThomasH-W/CO2-TTGO-MQTT
This is a project for measuring CO2 concentration as well as humidity and temperature. Different GUI modes are available.
TimHanewich/Air-Quality-IoT
Indoor air quality sensor box IoT project with 3D-printed housing!
airmeter-io/AirMeter.IO.Firmware
AirMeter.io is an OpenSource platform for building Internet of Things (IoT) connected CO2 monitors.
SCVready/co2-sensor-apple-homekit
Apple homekit CO2 sensor