geiger
There are 34 repositories under geiger topic.
Gissio/radpro
Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01, GQ GMC-800)
nmrr/flipperzero-geigercounter
☢☢ A geiger counter application for the Flipper Zero ☢☢
grillbaer/esp32-geiger-counter
IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT
MarcFinns/AtmoScan
Interactive air multisensor
RobertGawron/SemiconductorRadioactivityDetector
Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.
Whyzanet/WhyzaGC
Feather Huzzah ESP2866/ESP32 + Featherwing 128x64 OLED Arduino addon to Mightohm Gieger
impexeris/DiY-Arduino-Geiger-Counter-SMD
SMD hardware version of the Arduino IDE compatible 10MHz DiY Geiger counter
emdaniels/what-the-classics-know-of-blue
Analysis of classic works describing the color blue.
gbonacini/nuclear_random_number_generator
An Arduino / Geiger Counter based Random Number Generator
RobertGawron/GeigerMullerCounter
A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.
luigifab/python-radexreader
Reader for the RADEX RD1212 and the RADEX ONE Geiger counters.
johndoe31415/gammascoututil
Utility to read out Gamma Scout Geiger counters from Linux
GCY/MSP430G2-Geiger-Counter
This is Geiger-Muller Counter
McOrts/taller-iot-sensor_radiactividad
Taller IoT para construir un medidor Geiger conectado. Basado en el ESP8266, MQTT, Node-RED e integrado en la red GMC
slomkowski/usb-geiger
Low-cost USB Geiger counter device using STS-5 tube, ATTiny24 and Python-written host software.
Weesky/KB6011-geiger-counter
The KB6011 is a fourth-gen nuclear radiation detector for γ, X-ray, and β radiation. With a 5000 µSv/h range, high accuracy, real-time data, CPS/CPM stats, alarms, Type-C updates, and advanced settings, it’s ideal for home, workplace, and medical use. Compact (110g), portable, and highly versatile.
andkom/gmcalc
GM (Geiger-Muller) Tube Conversion Factor Calculator
ufnalski/geiger_muller_tube_true_randomness_g474re
Radioactive decay based random number generator using Geiger counter, STM32 and HAL.
ctoth/pygmc
Python library to communicate with GQ Electronics GMC Geiger Counters
Dreamy16101976/GeigerCounter_MATLAB
Geiger Counter in MATLAB / Счетчик Гейгера на MATLAB
johndoe31415/avrgeigerctr
AVR-based Geiger Counter with USB/RS232 output and TRNG interface
loneicewolf/Radioactivity-Detector_project
Project about Particle Physics!
michelelizzit/geigerino
Simple low-power geiger counter with Arduino
TenkyuChimata/WeatherStation
A weather station project that using ESP8266.
ahnaf-tahmid-chowdhury/micropython-geiger
Geiger counter library for micropython
renne/GeigerCounter
Geiger counter circuit board and software
RH-Electronics/Geiger-Detector-STS-5
Simple detector board for SBM-20 or STS-5
RH-Electronics/MyGeiger_ver2
Retired MyGeiger Project ver.2
RH-Electronics/RH-K-GK-1-L
Arduino IDE Geiger SD Logger ver. 1.01 RH-K-GK-1-L
thron2002/cpm_exporter
Prometheus Exporter for GQ GME-300E Plus Geiger Counter
YungTimAllen/caine
RadiationD-Cajoe for TRNG on Raspian
CouDeGras/Psychopompus
Geiger-mueller Counter based on Arduino/ESP8266 蓋革計數器
mryndzionek/attiny3226_geiger
ATtiny3226 Geiger counter