geiger-counter
There are 93 repositories under geiger-counter topic.
Gissio/radpro
Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)
nmrr/flipperzero-geigercounter
☢☢ A geiger counter application for the Flipper Zero ☢☢
ecocurious2/MultiGeiger
Geigerzähler mit ESP32 und empfindlichem Si22g-Zählrohr (Gamma)
chaim-zax/gq-gmc-control
Control tool for the GQ GMC Geiger Counters.
diyruz/geiger
Geiger counter
grillbaer/esp32-geiger-counter
IoT Geiger Counter with ESP32, OLED Display, Thingspeak Channel and MQTT
steadramon/ESPGeiger
☢️ ESP8266 / ESP32 Firmware for collecting and reporting statistics from Geiger counters
iotdevicesdev/ggreg20-v3-homeassistant-esphome-example
IoT-devices GGreg20_V3 Ionizing Radiation Detector module under Home Assistant server with ESPHome plugin setup example
RobertGawron/SemiconductorRadioactivityDetector
Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.
Safecast/bGeigieZen
bGiegieZen an Open Source Geiger Counter.
vinceh121/gmcserver
Lightweight server to log, analyze and proxy data measured by internet connected Geiger counters
ikarus23/GeigerWifi
Display measurements from the MightyOhm Geiger Counter on a display and website.
yanranxiaoxi/Multi-adaptation-Wi-Fi-Geiger-Counter-Double-Tube-Type
中文固件多管型 Wi-Fi 盖革计数器（MWGC-2T）
gbonacini/nuclear_random_number_generator
An Arduino / Geiger Counter based Random Number Generator
ckuethe/geigerlog
mirror from sourceforge. I can't be the only person interested in seeing what changed between each version, may as well put it on github.
iotdevicesdev/GGreg20_V3-ESP32-HomeAssistant-ESPHome
IoT-devices GGreg20_V3 ionizing radiation Geiger counter module for generic ESP32 under Home Assistant with ESPHome setup example
RobertGawron/GeigerMullerCounter
A nuclear radiation sensor with a Geiger–Müller (GM) tube as the detector. This widely used solution is cost-effective, easy to construct, and ideal for measuring ionizing radiation.
iotdevicesdev/DIY-Geiger-Counter-Module-GGreg20_V3
DIY Geiger Counter Module with Pulsed Output GGreg20_V3
Lawrence-Link/GeigerCounter-N1
An easy-to-build Geiger counter based on M4011 Geiger muller tube and Atmega328p(MCU)(SMD)
nmrr/flipperzero-atomicdiceroller
🎲☢ An atomic dice roller for the Flipper Zero ☢🎲
abitowhit/quickCPM
GMC-320 Radiation Detector Python Utility
iotdevicesdev/GGreg20_V3
IoT-devices GGreg20_V3 ionizing radiation detector module driver library for Arduino
iotdevicesdev/RPi-Pico-W_GGreg20_V3-ESPHome
GGreg20_V3 with Raspberry Pi Pico W under Home Assistant with ESPHome config example
Wikilicious/pygmc
Python interface/API for GQ GMC Geiger Counter.
stelas/GCLog
GCLOG is a lightweight daemon running in the background and constantly reporting your Geiger counter readings to various radiation monitoring websites. With a small footprint and minimal dependencies it is aimed to run on Linux embedded computers.
iotdevicesdev/ggreg20-v3-nodemcu-lua-example
This is a simple Lua script example for GGreg20_V3 / GGreg20_V1 ionizing radiation detector module with SBM-20 GM tube working under NodeMCU firmware on ESP32 / ESP8266
mkgeiger/geiger-counter-iot
Geiger Mueller counter for IoT on an ESP8266 microcontroller
iotdevicesdev/ggreg20-v3-tasmota-esp32-driver
GGreg20_V3 with Generic ESP32 with Tasmota Firmware and Berry script driver example
thinrope/NetRad-THS
Arduino-based DIY GM counter
vurdalakov/gmc-300
A set of C# classes and applications that communicates directly with Geiger counters GMC-280, GMC-300, GMC-320 connected with a USB cable.
abouvier/geiger
Geiger counter for Arduino
iotdevicesdev/ggreg20-v3-arduino-uno-wokwi-simulator
GGreg20_V3 Ionizing Radiation Detector for Arduino UNO WOKWI simulator
Kongduino/RAK4631_DFRobot_Geiger
Geiger counter code adapted from the DFRobot code for RAK4631
klumw/gqmqtt
GQ GMC-500+ USB serial to MQTT bridge
McOrts/taller-iot-sensor_radiactividad
Taller IoT para construir un medidor Geiger conectado. Basado en el ESP8266, MQTT, Node-RED e integrado en la red GMC
Weesky/KB6011-geiger-counter
The KB6011 is a fourth-gen nuclear radiation detector for γ, X-ray, and β radiation. With a 5000 µSv/h range, high accuracy, real-time data, CPS/CPM stats, alarms, Type-C updates, and advanced settings, it’s ideal for home, workplace, and medical use. Compact (110g), portable, and highly versatile.