jig

There are 15 repositories under jig topic.

  • alienwithin/OWASP-mth3l3m3nt-framework

    OWASP Mth3l3m3nt Framework is a penetration testing aiding tool and exploitation framework. It fosters a principle of attack the web using the web as well as pentest on the go through its responsive interface.

    Language:PHP16227266

  • coolsam726/jetstream-inertia-generator

    Laravel 8 Admin CRUD generator built with Jetstream, Inertia js, Vue 3 and Tailwindcss 2

    Language:Blade11893830

  • savannabits/acacia

    Backend Code Generator for Laravel 9, Vue 3 and Tailwindcss 3 using primevue

    Language:Vue4121510

  • reactivego/multicast

    NxM multicast channels for Go

    Language:Go12300
  • jig

    savannabits/jig

    Readily Configured Starter Template to quickly setup Jetstream Inertia Generator

    Language:Vue10165

  • eschlot/Box-Joint-Jig-Control

    The software for a Box Joint jig controlled by an Arduino Due

    Language:C++6301

  • snhobbs/kicad-testpoints

    Extract location of pads from a kicad layout. Useful for generating a test point report.

    Language:Python5311

  • TheJigsApp/kicad-testpoints-pcm

    KiCAD ActionPlugin released on the PCM. Uses the fabrication property of pads to mark them as test points. The plugin reads those properties and generates a spreadsheet with the pad identifiers, nets, characteristics, and position on the board. The report is generated in the standard JigsApp format.

    Language:Python3000

  • GeoMaciolek/led-panel-alignment-soldering-jig

    3D Printable "LED Panel Alignment" Jig for Soldering / Installation

    Language:OpenSCAD2110

  • TheJigsApp/kicad-testpoints

    Extract location of pads from a kicad layout. Useful for setting testpoint locations.

    Language:Python1000

  • devATdbsutdio/watch_battery_life_tester

    A notebook, running from. api with picam to press the watch button, through a jig, and do OCR on the image, to validate if the watch is functioning correctly.

    Language:Jupyter Notebook0100

  • mohamed-keshk/Magnet-force-jig

    A jig designed to measure the pulling force of magnets

    Language:C++0100

  • ioquatix/dowel-jig

    Language:OpenSCAD20

  • pmonks/cljig

    A little Clojure jig for discovering, evaluating, and prototyping 3rd party Clojure and Java libraries, for eventual use in your own project(s), all from the REPL.

    Language:Clojure31

  • shiomachisoft/PicoJig

    This is firmware and a PC application that controls the GPIO/UART/SPI/I2C/ADC/PWM of Raspberry Pi Pico W from a PC via Wi-Fi or USB.

    Language:C#