li-ion
There are 28 repositories under li-ion topic.
VR-25/acc
Advanced Charging Controller
ginbot86/DingoCharge-Shizuku
USB PD/PPS direct battery charge controller script for the YK-Lab Shizuku USB tester (a.k.a. YK-Lab YK001, AVHzY CT-3, Power-Z KT002, ATORCH UT18).
mcusim/Xling
Xling, a pocket demon
wagiminator/ATtiny85-TinyCharger
Single-Cell Li-Ion Battery Charger with Monitoring
ginbot86/ColorLCDVape-RE
Reverse-engineering of rechargeable disposable vapes that include a small color TFT LCD (Raz/Kraze/etc.)
megasaturnv/HX-2S-JH20-JH10-reverse-engineered_aka-2S-10A-Balance-Li-ion-Protection-PCB
Reverse engineered circuit board of the HX-2S-JH20 PCB . Aka 2S 10A w/Balance Li-ion BMS Protection Board.
cidetec-energy-storage/cideMOD
cideMOD solves DFN physicochemical equations by Finite Element methods using FEniCS library. It enables doing physics-based battery simulations with a wide variety of use cases, from different drive cycles to studies of the SEI growth under storage conditions. Thermal and degradation models can be used to obtain more realistic predictions.
wagiminator/ATtiny412-BatteryCapacityTester
Single-Cell Li-Ion, LiPo and LiFePO4 Battery Capacity Tester
willburk97/ESP32-BMS
Work in progress. Single ESP32 monitoring and balancing multiple cell Li-Ion battery.
shaurya101/BMS
Battery Management System for safe operation of Li-ion NMC cell for Nissan Leaf WLTP and Ather 450 MNEDC drive cycles for charge and discharge processes.
maciek134/libb6
A C++ library for interfacing with the SkyRC B6* chargers.
WattRex/Regenerative-Battery-Cycler
A 50W regenerative battery cycler (HW+SW design)
DrKRR/Build-Your-own-Power-Bank-for-your-Travel-and-IoT-Projects
The Project explains how to build a cost-effective Power bank for mobile phones during travel and for powering up the IoT Projects as DIY (Do It Yourself)
megasaturnv/arduino-gps-tracker
An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.
langchr86/homesensor
Air quality sensor designed for battery operation and central data collection in HomeAssistant.
batterylabunipi/TWIST
TWIST is an open framework for Li-ion cell characterization based on Python and Raspberry Pi
fededc88/bms_unr
Battery Management System for Electrical Vehicles - BMS
willburk97/CH4100_CANBUS_Control
Arduino Uno project to control (turn on) CH4100 Enpower charger for my Zero Motorcycle. Charger was OEM with 2.5kw ChargeTank.
willburk97/ESP-12E-BMS-Balancer
li-ion BMS / Balancer made of multiple NodeMCU ESP-12E (one per cell) using Adafruit io to store/track/trend each cell's voltage.
shaurya101/Li-cell-model
Modelling and predicting Li ion NMC cell behaviour for NEDC drive cycle.
VictorAlulema/UAVs-propulsion-systems-Database
Database of propulsion system components for electric and fuel powered UAVs
johndoe31415/koradcharger
Korad KA3005-based computer-controlled Li-Ion CC/CV charger
vijexa/Li-Ion_checker
Shows battery level by using addresable LED to save arduino pins and disabling load if there is too few voltage
VMelnalksnis/YABC
Yet Another Battery Cycler
dev-git92/MP2603
Single-Cell 150mA Linear Li-Ion Battery Charger.
sensorable/psu-4.2v-mppt-cccv
MPPT 4.2v Li-Ion charger and SBC PSU
b1u3-22/Springy
3D printable RC car with custom control board
msimerson/frankenYak
Electrifying Yak the snowmobile