mcufriend
There are 11 repositories under mcufriend topic.
ImpulseAdventure/GUIslice
GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL
Aditya-A-garwal/Arduino-TFT-LCD-3-5-Canvas-Paint
Program to create a freely paintable canvas on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library
Aditya-A-garwal/Arduino-TFT-LCD-3-5-Touch-Calibration
Program to calibrate 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library
Aditya-A-garwal/Arduino-TFT-LCD-3-5-SDCard-BMP
Program to load a BMP image from an SD Card and display it on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with Arduino UNO R3/R4 and MCUFRIEND Library
Aditya-A-garwal/Arduino-TFT-LCD-3-5-SDCard-Config-File
Program to demonstrate the usage of configuration files as separate entities from the program, using an SD Card with a 3.5" TFT LCD Touchscreen Display (using ILI9486 Driver), Arduino UNO R3/R4 and MCUFRIEND Library
Aditya-A-garwal/Arduino-TFT-LCD-3-5-SDCard-Logger
Program to demonstrate data logging using an SD Card with a 3.5" TFT LCD Touchscreen Display (using ILI9486 Driver), Arduino UNO R3/R4 and MCUFRIEND Library
Aditya-A-garwal/Arduino-TFT-LCD-3-5-Tic-Tac-Toe
Program to play TicTacToe on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library
AbhishekGhosh/MCUFRIEND-ST7789V-TFT-Calculator
MCUFRIEND ST7789V TFT Calculator Snippet for Arduino. Pull request to make better wanted.
adebaumann/Enigma_Visual_Simulator
Graphical simulation of the Enigma Machine which runs on an Arduino+MCUFriend touchscreen
PranaySadavarte/Touchscreen-TFT-Calculator
•This is a program used to make a TFT touchscreen calculator that performs all the basic operations with a visually appealing user interface.•This project requires an Arduino UNO R3 and a TFT Arduino shield.•Arduino IDLE is used to compile and upload the code and libraries like Adafruit_gfx Mcufriend_kbv are used to calibrate the TFT touchscreen.•Features like an editable welcome message, touch to proceed screen and a reset button is also provided for convenience.
piotrpdev/Arduino-Discord-Controller
Controlling Discord using a combination of Arduino, BetterDiscord, and Python.