nano-33-iot
There are 9 repositories under nano-33-iot topic.
khoih-prog/WiFiWebServer
This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA, CYW43439, U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library
khoih-prog/WiFiNINA_Generic
Enables WiFiNINA network connection (local and Internet) for SAM DUE, SAMD21, SAMD51, Teensy, AVR Mega, STM32, RP2040-based boards, etc. in addition to Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000, Arduino UNO WiFi Rev.2 , Nano 33 IoT, Nano_RP2040_Connect. Now with fix of severe limitation to permit sending much larger data than total 4K
khoih-prog/WiFiManager_NINA_Lite
Light-Weight WiFi/Credentials Manager for AVR Mega, Teensy, SAM DUE, SAMD, STM32, etc. boards running U-Blox WiFiNINA modules/shields. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. Now using WiFiMulti_Generic library
khoih-prog/SAMD_TimerInterrupt
This library enables you to use Interrupt from Hardware Timers on an SAMD-based board. These SAMD Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. SAMD21 now can use 6 Timers
khoih-prog/UPnP_Generic
A simple library that implements port mappings to router using UPnP SSDP for Arduino boards, running on nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, RP2040-based boards, WT32_ETH01, Portenta_H7, etc. besides ESP8266/ESP32, using ESP WiFi, WiFiNINA, Ethernet W5x00, ESP8266/ESP32 AT-command WiFi, Portenta_H7 Murata WiFi or Vision-shield Ethernet.. It is designed to be light-weight and can run only on Ethernet or WiFi hardware/library supporting UDP Multicast. Supporting Teensy 4.1 QNEthernet now.
khoih-prog/SAMD_PWM
This library enables you to use Hardware-based PWM channels on SAMD21/SAMD51-based boards to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
khoih-prog/SAMD_Slow_PWM
This library enables you to use Hardware Timers on SAMD21/SAMD51 boards to create and output PWM to pins. These PWM channels, using SAMD21/SAMD51 Hardware Timers, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. Max PWM frequency is limited at 1000Hz
D34G/SamdAudioSD
Audio library for Atmel SAMD series Arduino Family of microcontrollers. Tested on the Nano 33 IoT.
Matt-Anders-Gib/Strife-Sloops
Strife Sloops is a Battleships-like realtime multiplayer game written in C++ for the Arduino Nano 33 IoT. Wire it yourself and have fun!