qt-py
There are 11 repositories under qt-py topic.
LyndLabs/Cutie-Wardriver
The Cute ESP32 Pocket Wardriver! Based on the Xiao / QT-Py boards.
charkster/samd21-i2c_slave
This implements an i2c slave with a register map of 256 bytes in sram. The slave supports multi-byte writes and reads. It uses the "Wire" library.
charkster/relay_usbtmc
Two relay channels are controlled with an Adafruit QT PY running USBTMC
jwillikers/PWM-Fan-Controller
A simple program for controlling a PWM fan from a microcontroller with Rust
charkster/arduino_dac
Arduino library DAC control using a serial (USB) terminal
charkster/mux_board_v3
Custom PCB with SAMD21 QT PY controlling TWO ADG1606BRUZ 16 input muxes!
charkster/mux_board_v5
Custom PCB with SAMD21 QT PY controlling TWO ADG1606BRUZ 16 input muxes! This board is 30% smaller than V3 and uses a single 16x2 pin header.
charkster/samd21-debounce_time
The rising and falling debounce duration between two pins is measured. Maximum debounce duration is 4 seconds rising or falling (no limit on how long both signals can be high for).
charkster/samd21-pulse_generator
A software defined pattern is given by serial input and then driven on a gpio pin. Fastest pattern has 2us intervals, but any interval may be specified.
junxian428/DesktopApp_Qt_Example_Production
Documentation. This example for production-ready. However, it does not include local server and api server call (multithreading or run-subprocess)
jwillikers/fan-controller-circuitpython
A simple program to set the speed of a fan using the RP2040 QT Py and the EMC2101 fan controller