rain-gauge
There are 9 repositories under rain-gauge topic.
pilotak/WeatherMeters
Arduino library for processing wind speed, wind wane and rain gauge sensors (WH 1080, Sparkfun)
vhuynen/CubeCell-AB01-LoRaWAN-Helium-Rain-Gauge
This DIY project is a LoRaWAN Rain Gauge based on CubeCell HTCC AB01 development Board.
AdrianoGarafulic/Rain-Gauge-Esp8266-NTP-RTC
Using Croduino Nova2 ESP8266, Blynk, Arduino OTA, NTP servers, RTC internal clock and precipitation sensor, a precipitation meter was made. Since the rainfall measurement is reset every day at midnight, the microcontroller needs to know what time it is. Each time the microcontroller is started and connected to the Internet, it pulls the time from the NTP server and starts the internal RTC clock with the obtained time value. Because if the time was constantly withdrawn from the NTP server in case of being left without an Internet network, the rainfall value would not be reseted at midnight, so it only withdraws time from the NTP server once and later relies on the internal RTC.
tve/mpy-weather
Weather station for an esp32 running micropython
ecosensors/EcoBoard
The IoT EcoBoard v3 is microcontroler based on the processor ATSAMD21G18 ARM Cortex M0 at 48Mhz with 3V3 logic, as the Arduino Zero. The chip has 256K of FLASH and 32K of RAM. It's fully compatible with Arduino and Adafruit libraries.
Nerconer/pluviograph
Software to control an electronic pluviograph with Arduino and visualize data using HighCharts
UniversalScientificTechnologies/DISDROMETER01
Mobile, SDR based piezoeletcric disdrometer instrument
R4sp1/NB-IoT-Rain-Gauge
Bachelor's thesis support repository
stephaniekyyip/electronicRainGauge
Electronic rain gauge using an ESP8266 microcontroller for my senior design project.