rfm95w

craigpeacock/Zephyr_LoRaWAN

An example LoRaWAN Application on the Zephyr RTOS

sparkfun/SAMD21_Pro_RF

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board.

pappavis/ESP8266-single-channel-lora-gateway

DIY lora gateway using Wemos D1 ESP8266

joao1996f/RFM95-Breakout-Board

A breadboard friendly breakout board for the RFM95 LoRa module.

xinsnake/attiny-lora-envsensor

ATTiny1614 + SX1276 + BME280

headblockhead/tinygorfm9x

A tinygo library to run an rfm9x module - RFM95/96/97/98 (W)

qqqlab/rfm69-arduino

Arduino with RFM69 ISM radio running at 1.8V

jawher-Mansour/Ultra-low-cost-LoRaWAN-temp-humidity-sensor

Ultra low cost LoRaWAN temp & humidity sensor based on Atmega328p , DHT 11 and RFM95W LoRa WAN module

joba-1/STM32L0LoraTx

Send ADC voltage and other payload via LoRa RFM95W

marcusdechant/RadioProject

Remote Sensor Project

automote/single_chan_pkt_fwd

Single Channel LoRaWAN Gateway

dammianhr/loraWan_tests

nerdyscout/SmartPi_LCD_Shield

Just another LCD Shield for you Arduino... but with ALOT extra features!

sitronlabs/MySensors-RFM-USB-Gateway

Compact USB MySensors gateway with a RFM69 or RFM95 radio for DIY IoT sensors

wooni005/ProMini-LoRa-Contact

LoRa node for reading the status of a connected contact using the Arduino Pro Mini on a Li-Ion cell

wooni005/ProMini-LoRa-Hottub

LoRa node for measuring Hottub water and filtration temperature using the Arduino Pro Mini on a Li-Ion cell

wooni005/ProMini-LoRa-Pool-Temp

LoRa node for measuring the pool water and air temperature using the Arduino Pro Mini on a Li-Ion cell

wooni005/ProMini-LoRa-pulse-count

LoRa node for reading the pulses of the energy meter using the Arduino Pro Mini on a Li-Ion cell

wooni005/ProMini-LoRa-Temperature

LoRa node for measuring the temperature using the Arduino Pro Mini on a Li-Ion cell

wooni005/ProMini-LoRa-Weather

LoRa Weather for my weather station using the Arduino Pro Mini on a Li-Ion cell