samd21g18
There are 21 repositories under samd21g18 topic.
majbthrd/SAMDx1-USB-DFU-Bootloader
1kByte USB DFU Bootloader for SAMD11 / SAMD21
majbthrd/D21ecm
CDC-ECM (Linux and macOS USB network) example SAMD21 embedded web server (lwip 2.1.2 based)
majbthrd/D21rndis
USB RNDIS example SAMD21 embedded web server (lwip 2.1.2 based)
blockfeed/sam-fusee-launcher-internal
Internal/External Fusee Launcher for the Nerdonic Exen Mini (Switch "modchip"/"dongle")
aswild/samd21
Makefile, Arduino Library, and Programs for SAMD21
majbthrd/D21eem
USB CDC-EEM example SAMD21 embedded web server (lwip 2.1.2 based)
abaelen/Arduino-Isochronous-USB
Arduino M0 Isochronous USB IN transaction without changing the ArduinoCore
abaelen/Arduino-MKR-1010-WiFi-on-Atmel-Studio-7--without-debugger-
Uploading code to Arduino MKR 1010 Wifi using Atmel Studio 7 without debugger
wa1tnr/CamelForth-SAMD51-SAMD21
CamelForth for the ATSAMD51J19A + ATSAMD21G18A
abaelen/Unbrick-Arduino-MKR-1010-WiFi--SAMD21G-using-PI3
Load bootloader onto the Arduino MKR 1010 WiFi (SAMD21G) using a raspberry PI3
Bexin3/Fast-Analog-to-PWM-for-SAMD21
A .ino project for SAMD21 Arduinos tested on Arduino Zero that allows conversion of Analog values into PWM duty cycle, tested frequencies are 0.00281hz-200khz
knei-knurow/samd21g18-samples
Example projects & code for the SAMD21G18 microcontroller.
aakashpk/ecen5013-004_PCB_Design
Course Projects for PCB Design Course
abaelen/Arduino-MKR-1010-ADC-at-300KSPS-with-SerialPlot
Code to run Arduino MKR1010 ADC at 300KSPS with serialPlot
abaelen/Arduino-MKR1010--SAMD21G--read-out-registers
Code to read out the register states of the Arduino MKR 1010 Wifi (SAMDG18a)
abaelen/SPI-drivers
SPI-drivers for ESP32 / Raspberry PI3 / Arduino M0/Mkr
EzSBC/SAMD21
Files for the SAMD21G18 board.
ReWire-LLC/rewire_board_definitions
Arduino IDE board definitions for ReWire circuit boards
ReWire-LLC/rewire_pulse_oximeter_firmware
Firmware for the ReWire pulse oximeter
ednieuw/Pocketscreen_Wordwatch
A word watch for the Pocket screen