stm32h747

There are 11 repositories under stm32h747 topic.

  • khoih-prog/Portenta_H7_TimerInterrupt

    This library enables you to use Interrupt from Hardware Timers on an STM32H7-based Portenta_H7 board. It now supports 16 ISR-based timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware timers, using interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's necessary if you need to measure some data requiring better accuracy

    Language:C15527

  • gdobato/portenta-h7

    It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).

    Language:Rust10233

  • Bexin3/STMSpeeduino

    Speed up functions on your STM32H747 based Arduino

    Language:C++53260

  • ahmedalkabir/GigaWiFiSolver

    if you encountered an issue of enabling WiFi of Arduino Giga R1 WiFi maybe this library can help you

    Language:C4301

  • gdobato/portenta-h7-async

    It provides examples for the Arduino Portenta-H7 board written in Rust. The software can be flashed on the target either with USB (DFU), or with a debug probe (JLink, ST-Link).

    Language:Rust3101

  • c4chris/H747-Camera

    Explore AI possibilities to sort seeds using STM32 H7 board coupled to a camera

    Language:C2102

  • sh3r4zhassan/STM32H747I-DISCO_ADC

    STM32H747I-DISCO_ADC is an STM32CubeIDE based project. It includes a code source for basic ADC read in STM32H747I DISCO.

    Language:C1100

  • sh3r4zhassan/STM32H747I-DISCO_I2C_SD

    STM32H747I-DISCO_I2C_SD is an STM32CubeIDE project. It takes embeded sensor readings using I2C from STM32H747I DISCO board and store all the readings in the SD card. The SD card should be inside the card slot for this code to work properly.

    Language:C1100
  • SensEdu-Library

    vladysor/SensEdu-Library

    SensEdu Projects Development Framework

    Language:C1

  • sh3r4zhassan/STM32H747I-DISCO_SDCARD

    STM32H747I-DISCO_SDCARD is an STM32CubeIDE project. It includes a code for efficiently storing data into an SDCard for STM32H747I-DISCO board.

    Language:C0100

  • sh3r4zhassan/STM32H747I-DISCO_UART

    STM32H747I-DISCO_UART is a STM32CubeIDE project. It includes a code file for uart operation in. STM32H747I-DISCO.

    Language:C10