ventilation
There are 61 repositories under ventilation topic.
dentra/esphome-tion
ESPHome Tion Breezers control and monitoring
anklimov/lighthub
Flexible, Arduino Mega/Due/ESP8266/ESP32/STM32 based SmartHome controller with DMX-512 in/out, 1-Wire, Modbus, MQTT interfaces. OpenHab/HomeAssistant/ioBroker compatible.
Hywan/LaMaisonVivante
Home Automation programs for my self-sufficient house
inwaar/gree-hvac-client
Client for controlling Gree (and other compatible) smart air conditioners
superrob/genvexconnect
Integrate your Genvex Connect/Nilan Gateway locally into your Home Assistant setup
rsnodgrass/hass-lunos
LUNOS HRV Ventilation Fan Control for Home Assistant
sirjackal/brink-modbus
Brink Flair 300 control over Modbus
inwaar/node-red-contrib-gree-hvac
Provides a node for controlling Gree HVAC (Heating, ventilation, and air conditioning).
49jan/hass-ecovent
Custom component for Home Asistant.
danielbayerlein/vallox-api
📚 API for Vallox ventilation units
samuolis/brink
Brink-home ebus emodule home assistant integration
asev/homeassistant-helios
Custom component for Home Assistant to connect Helios ventilation system.
bolkedebruin/erhv-lovelace
Homeassistant Lovelace Energy Reclaim Home Ventilation card
raf1000/brink_openhab
Brink Renovent HR and Openhab integration
Tvalley71/dantherm
Dantherm Integration for Home Assistant
rubenbe/comfospottwin40
Control your Zehnder ComfoSpot Twin 40
alryaz/hass-turkov
Turkov integration for Home Assistant
KLVN/ioBroker_Helios-KWL
Script for smart home automation platform @ioBroker that connects to and controls your Helios KWL ventilation system
ksvan/node-red-contrib-komfovent
Node-red node for changing mode of Komfovent units running C6 controller
perara/systemair-save-connect
Systemair SAVE Connect: custom integration for Home Assistant
intellicasa/ioBroker.blauberg-ventilation
IO Broker Adapter for integration Blauberg vents
AshNiz24/RVCS
A microcontroller based Room Ventilation Control System, which uses a signal from a remote control to dynamically close and open ventilators.
iobroker-community-adapters/ioBroker.comfoair
ioBroker Adapter to control your Zehnder ComfoAir ventilation
pjazdzyk/sound-dampening-analyzer
Noise generation, propagation and dampening C# library for ventilation ducts based on VDI-2081 standard.
TaviTav/DuctWork
Sketchup extension for creating ventilation duct and duct fittings
HairingX/nilan_connect
Integrate your Nilan Gateway or Genvex Connect locally into your Home Assistant setup
Mike-Honey/covid-19-hospitalisations
Projects on the topic of COVID-19 hospitalisations - mostly DataViz
tgh-apil/Cerberus-Multivent
Emergency Ventilator-Sharing System. A system using standard ventilation circuit parts and localy-manufacturable custom components to allow the use of a single ventilator to support two patients with independent control of tidal volume, FiO2, and PEEP for each patient.
HrGaertner/vent-optimization
A project developing a model and webapp helping to optimize ventilation in order to keep heat
mld18/ioBroker.valloxSerial
This is an ioBroker adapter. It is used to read settings and data as well as to change settings of Vallox ventilation units of type SE. I.e., units that are controlled electronically via the legacy Vallox RS-485 serial protocol.
Tvalley71/pluggit
Pluggit Integration for Home Assistant
chsc/DATIV
DATIV-Dynamic Aerosol Transport for Indoor Ventilation with Smart Array of Particulate MAtter Sensors (SAPMAS)
Cian911/bento
Go client to automate blauberg-vento smart fan & ventilation systems based on CO2 data from InfluxDB.
Metabolix/HomeVentilationControl-HASS
Home Assistant integration for HomeVentilationControl.
nyxnyx/lovelace-comfoair
Homeassistant Lovelace Comfoair card
ulrischa/CellarVentilator
Check when to ventilate your cellar or any other room