wallbox
There are 47 repositories under wallbox topic.
evcc-io/evcc
Sonne tanken ☀️🚘
steff393/wbec
Control Heidelberg Wallbox Energy Control over WiFi using ESP8266
pvtom/rscp2mqtt
Bridge between an E3/DC home power station and an MQTT broker based on the RSCP protocol
marq24/ha-evcc
Home Assistant integration for evcc☀️🚘- optimized charging of electric vehicles, connecting your EV charger with your PV system. The integration use local polling (interval configurable) of the evcc API. Please note, that this integration is not official and not supported by the evcc developers. This project is not affiliated with evcc in any way.
ArnoD15/iobroker_E3DC
Laderegelung E3DC Hauskraftwerk mit Wetterprognose
foxriver76/ioBroker.ocpp
Adapter to connect OCPP 1.6 supported Wallbox to ioBroker.
mb-software/homeassistant-powerbrain
Custom Component for Homeassistant to integrate cFos Powerbrain devices
alengwenus/ha-sma-ev-charger
SMA EV Charger integration for Home Assistant
ECOM-Engineering/EvSmartCharge
Software controller for efficient charging of electric vehicles using home solar power
marq24/ha-goecharger-api2
HA integration for go-eCharger series (V3 and higher) communicate via the HTTP API v2.0. [supporting 148 of 172 API-Keys]. Please note, that this integration is not official and not supported by the go-e developer team. This project is not affiliated with go-e.com in any way.
hombach/ioBroker.go-e-charger
Adapter for reading go-eCharger data. Adapter creates some states and updates sequentially.
wene37/WeConnect-SolarManager
Software for automatically charge VW ID cars with solar power
cvvmedia/symcon.cvvmedia.ablchargepoint
IP-Symcon Module to integrate ABL chargepoint devices
dilipsuthar97/WallBox
In maintenance... | WallBox, a beautiful and google material design based wallpaper app, that is based on Unsplash API, you can access thousands of wallpaper in this. Unofficial Unsplash app.
raibisch/ESP32_ABL
Monitor and control your ABL-Wallbox with an WEB-Application and integrate it in your homeautomation software with simple REST-Interface
CreasolTech/DomBusEVSE_ha
Home Assistant configuration files for DomBusEVSE module to make a DIY wallbox charging station
SKB-CGN/ioBroker.mywallbox
This ioBroker adapter allows to read and control your Wallbox (e.g. Wallbox Pulsar)
diginize/homebridge-go-e-charger
A homebridge integration for the go-e charger wallbox.
martiby/pv2car
PV Überschussladen mit go-eCharger HomeFix
abrlox/home-assistant-phoenix-ev-charger
Home Assistant Integration for communicating with Phoenix Contact EV Charge Controllers found e.g. in ESL "Walli LIGHT" and "Walli LIGHT pro" wallboxes. Communication s done via Modbus TCP.
ChrisWbb/ioBroker.sonnen-charger
Integration of sonnenCharger into ioBroker
connectorjs/evcm
Electric Vehicles Charging Management Software⚡☀️🚘🔌
erik73/addon-steve
SteVe OCPP Server - Home Assistant Add-on by Erik73
hombach/ioBroker.chargemaster
Adapter for managing of multi EV-chargers with use of PV-energy
martiby/meterhub
Combining the different meters of a house installation
mikes222/teslacharging
Control your tesla from command-line
mschmitt/shocpp
A rudimentary implementation of OCPP, the Open Charge Point Protocol, Version 1.6
nobl/ioBroker.tesla-wallconnector3
Adapter for ioBroker reading API of the Tesla Wall Connector Gen 3
pottio/ioBroker.warp
Adapter for ioBroker: Monitors and controls a wallbox (WARP charger) by Tinkerforge
relyd/modbussniffer
Read Modbus powermeter used with Wallbox
t-pa/chargeoptimizer
Optimize the charging of your car according to energy market prices
cubos-technologies/evcc
Sonne tanken ☀️🚘
eidmanna/iobroker
Controlling Fronius Inverter Battery with ioBroker
Musicaloris/sb-goe-ueberschussladen
PV-Überschussladen mit einer SonnenBatterie und einem Go-eCharger
pvtom/s10mod
E3/DC S10 Modbus to MQTT connector
zapccu/ioBroker.sma-ev-charger
Adapter for SMA EV Charger wallbox