wemos-d1-r1

There are 4 repositories under wemos-d1-r1 topic.

  • nockanda/multiple-ds18b20-mqtt

    This is an example of connecting multiple ds18b20 sensors to wemos d1 r1 board and sending them through mqtt.

    Language:C++2100

  • nockanda/doorlock-espnow

    This is an example of remotely unlocking a door lock using ESPNOW!

    Language:C++1101

  • nockanda/multiple-ds18b20-websocket

    This is an example of using a websocket server by connecting several ds18b20 temperature sensors to the wemos d1 r1 board!

    Language:C++110

  • TSBrownie/Arduino-Wemos-D1-Seismometer-Load-Cell-v1.0

    Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2

    Language:C++1101