tttapa/Control-Surface-Motor-Fader

Issues

• Disable Touch?

  #27 opened a month ago by Taroc22
  2

• Using it with ESP32-S2

  #26 opened a month ago by labodezao
  12

• MotorFader Bank

  #25 opened 4 months ago by jochen-source
  0

• Some questions about using arduino nano, TB6612

  #24 opened 6 months ago by Renlong2020
  10

• PID controller pre-calculated Ki_Ts not possible ?

  #12 opened 2 years ago by lole-elol
  2

• Problems using 8 motorized faders and Midi Interface

  #3 opened 4 years ago by Vahen1981
  12

• Using a TB6612FNG

  #21 opened a year ago by Ilosariph
  4

• Some DAW not output PB Value when I move real fader

  #19 opened a year ago by huykaamaa
  6

• Multi controller example

  #17 opened 2 years ago by octave
  1

• Sometimes a fader goes crazy, after hours working

  #7 opened a year ago by Vahen1981
  5

• Stuttering with L298N H-Bridge

  #18 opened 2 years ago by Robert-K
  4

• Midi Controller and Motor Fader Controller on Teensy 4.1

  #16 opened 2 years ago by HenkVanHoek
  1

• Use library without touch sensitive motor faders

  #13 opened 2 years ago by FabiB98
  2

• At start, at I2C control mode, the fader goes to zero, but the motor don't stop

  #10 opened 3 years ago by mediaMicha
  0

• Use on Arduino Uno

  #9 opened 3 years ago by mediaMicha
  4

• How to connect lines？

  #8 opened 3 years ago by liyunlong277
  0

• Motorized fader guidance

  #6 opened 3 years ago by PJordan2820
  7