This README is under construction as we work to build a new community driven high performance key-value store.
This project was forked from the open source Redis project right before the transition to their new source available licenses.
This README is just a fast quick start document. We are currently working on a more permanent documentation page.
Valkey is a high-performance data structure server that primarily serves key/value workloads. It supports a wide range of native structures and an extensible plugin system for adding new data structures and access patterns.
Valkey can be compiled and used on Linux, OSX, OpenBSD, NetBSD, FreeBSD. We support big endian and little endian architectures, and both 32 bit and 64 bit systems.
It may compile on Solaris derived systems (for instance SmartOS) but our support for this platform is best effort and Valkey is not guaranteed to work as well as in Linux, OSX, and *BSD.
It is as simple as:
% make
To build with TLS support, you'll need OpenSSL development libraries (e.g. libssl-dev on Debian/Ubuntu) and run:
% make BUILD_TLS=yes
To build with experimental RDMA support you'll need RDMA development libraries (e.g. librdmacm-dev and libibverbs-dev on Debian/Ubuntu). For now, Valkey only supports RDMA as connection module mode. Run:
% make BUILD_RDMA=module
To build with systemd support, you'll need systemd development libraries (such as libsystemd-dev on Debian/Ubuntu or systemd-devel on CentOS) and run:
% make USE_SYSTEMD=yes
To append a suffix to Valkey program names, use:
% make PROG_SUFFIX="-alt"
You can build a 32 bit Valkey binary using:
% make 32bit
After building Valkey, it is a good idea to test it using:
% make test
If TLS is built, running the tests with TLS enabled (you will need tcl-tls
installed):
% ./utils/gen-test-certs.sh
% ./runtest --tls
Valkey has some dependencies which are included in the deps directory.
make does not automatically rebuild dependencies even if something in
the source code of dependencies changes.
When you update the source code with git pull or when code inside the
dependencies tree is modified in any other way, make sure to use the following
command in order to really clean everything and rebuild from scratch:
% make distclean
This will clean: jemalloc, lua, hiredis, linenoise and other dependencies.
Also if you force certain build options like 32bit target, no C compiler
optimizations (for debugging purposes), and other similar build time options,
those options are cached indefinitely until you issue a make distclean
command.
If after building Valkey with a 32 bit target you need to rebuild it
with a 64 bit target, or the other way around, you need to perform a
make distclean in the root directory of the Valkey distribution.
In case of build errors when trying to build a 32 bit binary of Valkey, try the following steps:
- Install the package libc6-dev-i386 (also try g++-multilib).
- Try using the following command line instead of
make 32bit:make CFLAGS="-m32 -march=native" LDFLAGS="-m32"
Selecting a non-default memory allocator when building Valkey is done by setting
the MALLOC environment variable. Valkey is compiled and linked against libc
malloc by default, with the exception of jemalloc being the default on Linux
systems. This default was picked because jemalloc has proven to have fewer
fragmentation problems than libc malloc.
To force compiling against libc malloc, use:
% make MALLOC=libc
To compile against jemalloc on Mac OS X systems, use:
% make MALLOC=jemalloc
By default, Valkey will build using the POSIX clock_gettime function as the monotonic clock source. On most modern systems, the internal processor clock can be used to improve performance. Cautions can be found here: http://oliveryang.net/2015/09/pitfalls-of-TSC-usage/
To build with support for the processor's internal instruction clock, use:
% make CFLAGS="-DUSE_PROCESSOR_CLOCK"
Valkey will build with a user-friendly colorized output by default. If you want to see a more verbose output, use the following:
% make V=1
To run Valkey with the default configuration, just type:
% cd src
% ./valkey-server
If you want to provide your valkey.conf, you have to run it using an additional parameter (the path of the configuration file):
% cd src
% ./valkey-server /path/to/valkey.conf
It is possible to alter the Valkey configuration by passing parameters directly as options using the command line. Examples:
% ./valkey-server --port 9999 --replicaof 127.0.0.1 6379
% ./valkey-server /etc/valkey/6379.conf --loglevel debug
All the options in valkey.conf are also supported as options using the command line, with exactly the same name.
Please consult the TLS.md file for more information on how to use Valkey with TLS.
Note that Valkey Over RDMA is an experimental feature. It may be changed or removed in any minor or major version. Currently, it is only supported on Linux.
To manually run a Valkey server with RDMA mode:
% ./src/valkey-server --protected-mode no \
--loadmodule src/valkey-rdma.so bind=192.168.122.100 port=6379
It's possible to change bind address/port of RDMA by runtime command:
192.168.122.100:6379> CONFIG SET rdma.port 6380
It's also possible to have both RDMA and TCP available, and there is no conflict of TCP(6379) and RDMA(6379), Ex:
% ./src/valkey-server --protected-mode no \
--loadmodule src/valkey-rdma.so bind=192.168.122.100 port=6379 \
--port 6379
Note that the network card (192.168.122.100 of this example) should support RDMA. To test a server supports RDMA or not:
% rdma res show (a new version iproute2 package)
Or:
% ibv_devices
You can use valkey-cli to play with Valkey. Start a valkey-server instance, then in another terminal try the following:
% cd src
% ./valkey-cli
valkey> ping
PONG
valkey> set foo bar
OK
valkey> get foo
"bar"
valkey> incr mycounter
(integer) 1
valkey> incr mycounter
(integer) 2
valkey>
In order to install Valkey binaries into /usr/local/bin, just use:
% make install
You can use make PREFIX=/some/other/directory install if you wish to use a
different destination.
Note: For compatibility with Redis, we create symlinks from the Redis names (redis-server, redis-cli, etc.) to the Valkey binaries installed by make install.
The symlinks are created in same directory as the Valkey binaries.
The symlinks are removed when using make uninstall.
The creation of the symlinks can be skipped by setting the makefile variable USE_REDIS_SYMLINKS=no.
make install will just install binaries in your system, but will not configure
init scripts and configuration files in the appropriate place. This is not
needed if you just want to play a bit with Valkey, but if you are installing
it the proper way for a production system, we have a script that does this
for Ubuntu and Debian systems:
% cd utils
% ./install_server.sh
Note: install_server.sh will not work on Mac OSX; it is built for Linux only.
The script will ask you a few questions and will setup everything you need to run Valkey properly as a background daemon that will start again on system reboots.
You'll be able to stop and start Valkey using the script named
/etc/init.d/valkey_<portnumber>, for instance /etc/init.d/valkey_6379.
Please see the CONTRIBUTING.md. For security bugs and vulnerabilities, please see SECURITY.md.
Valkey a Series of LF Projects, LLC 2810 N Church St, PMB 57274 Wilmington, Delaware 19802-4447