uhi22/pyPLC

EVSE MODE TCP NOT CONNECTION

Mustafa19981903 opened this issue · 1 comments

Mustafa19981903 commented

Ekran Alıntısı1
Ekran Alıntısı
It came out like this, I bought it, what can I do? My car is Zoe.

uhi22 commented

A little bit more context would be helpful. I understand the following:

  • You have a Zoe which has a CCS connector.
  • You want to use pyPLC to talk to the Zoe.
  • The pyPLC runs in EVSE mode. Ok, this fits to the above use case.
  • The pyPLC transmits a SetKey request to the modem, but does not get a response. This is bad. Check the presence of the modem.
  • The pyPLC does not indicate that it receives SLAC messages from the car. This is bad. Can be caused by the missing modem, wrongly configured modem, missing 5% PWM, missing connection to the car.