[BUG] Getting no stream available

Question

[BUG] Getting no stream available

Closed this issue a year ago · 9 comments

onthatb0mbshell commented a year ago

Bug

Hi, I'm getting no stream available, not sure if a recent update requires action on my part.
Log

Expected Result

Expect to see a list of sources after searching for TV/movie

Steps To Reproduce

Umbrella
Search movies
Spectre
Spectre(2015)
No Stream Available

Kodi Version, Type of Device, Logs, Screenshots, and Additional Info

Kodi 20.1
Firestick 4K

Checklist

I have included logs and the version of Kodi I am using..
I have made a separate issue for each bug that I am reporting.
I have verified this is not a setting.

Answer 1 · 2023-08-27T11:58:41.000Z

It's not a bug.

Follow the steps adamosborne83 kindly provided.

Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here

https://cocojoe2411.github.io/

I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo

Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy.

UMBRELLA SET UP

These are the steps required to allow Umbrella to now work with CoCo.

https://imgur.com/a/6LyyO3U

Fine, here is a Video too https://imgur.com/a/oiLDokr

This is a really easy process to which the above should show you step by step. Which consists of 6 photos.

Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully"

FEN SET UP

Again, see the link below with a picture Step by Step guide with 5 pictures to follow

https://imgur.com/a/slPOHY9

Then you'll see "SUCCESS"

Simple as that.

Any issues then just say and I am sure people will be able to help.

PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names.

Answer 2 · 2023-08-27T12:03:26.000Z

Thanks very much for the info, I did suspect it was something that had changed, appreciate the quick reply 👍

Answer 3 · 2023-08-27T12:06:38.000Z

When I follow the link to https://imgur.com/a/6LyyO3U I just see the Change Log. Is there an actual list of steps somewhere or would someone be so kind as to create a step-by-step list?

…

On Aug 27, 2023, at 7:58 AM, 666jones ***@***.***> wrote: It's not a bug. Follow the steps adamosborne83 kindly provided. Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here https://cocojoe2411.github.io/ I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy. UMBRELLA SET UP These are the steps required to allow Umbrella to now work with CoCo. https://imgur.com/a/6LyyO3U Fine, here is a Video too https://imgur.com/a/oiLDokr This is a really easy process to which the above should show you step by step. Which consists of 6 photos. Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully" FEN SET UP Again, see the link below with a picture Step by Step guide with 5 pictures to follow https://imgur.com/a/slPOHY9 Then you'll see "SUCCESS" Simple as that. Any issues then just say and I am sure people will be able to help. PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names. — Reply to this email directly, view it on GitHub <#322 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4RVAPZSLFULSUFWHHKXJLLXXMY73ANCNFSM6AAAAAA4AIJSYU>. You are receiving this because you are subscribed to this thread.

Answer 4 · 2023-08-27T12:13:27.000Z

When I follow the link to https://imgur.com/a/6LyyO3U I just see the Change Log. Is there an actual list of steps somewhere or would someone be so kind as to create a step-by-step list?
…
On Aug 27, 2023, at 7:58 AM, 666jones @.***> wrote: It's not a bug. Follow the steps adamosborne83 kindly provided. Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here https://cocojoe2411.github.io/ I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy. UMBRELLA SET UP These are the steps required to allow Umbrella to now work with CoCo. https://imgur.com/a/6LyyO3U Fine, here is a Video too https://imgur.com/a/oiLDokr This is a really easy process to which the above should show you step by step. Which consists of 6 photos. Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully" FEN SET UP Again, see the link below with a picture Step by Step guide with 5 pictures to follow https://imgur.com/a/slPOHY9 Then you'll see "SUCCESS" Simple as that. Any issues then just say and I am sure people will be able to help. PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names. — Reply to this email directly, view it on GitHub <#322 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAPZSLFULSUFWHHKXJLLXXMY73ANCNFSM6AAAAAA4AIJSYU. You are receiving this because you are subscribed to this thread.

That link shows 6 photos.

Anyway the steps are

Umbrella - settings - providers - enable external providers - select Cocoscraper.

Also if you haven't installed the Cocoscraper repo id recommend doing so and also click on the version from within the Cocoscraper repo and update / install it. You won't lose any settings. This way you will get future updates from Cocoscraper

Answer 5 · 2023-08-27T12:16:43.000Z

OK, I am an idiot. Instead of scrolling down, I just hit next which sent me to a dancing doggy video. Sorry for being inept.

…

On Aug 27, 2023, at 8:13 AM, 666jones ***@***.***> wrote: When I follow the link to https://imgur.com/a/6LyyO3U I just see the Change Log. Is there an actual list of steps somewhere or would someone be so kind as to create a step-by-step list? … <x-msg://14/#> On Aug 27, 2023, at 7:58 AM, 666jones @.***> wrote: It's not a bug. Follow the steps adamosborne83 kindly provided. Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here https://cocojoe2411.github.io/ I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy. UMBRELLA SET UP These are the steps required to allow Umbrella to now work with CoCo. https://imgur.com/a/6LyyO3U Fine, here is a Video too https://imgur.com/a/oiLDokr This is a really easy process to which the above should show you step by step. Which consists of 6 photos. Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully" FEN SET UP Again, see the link below with a picture Step by Step guide with 5 pictures to follow https://imgur.com/a/slPOHY9 Then you'll see "SUCCESS" Simple as that. Any issues then just say and I am sure people will be able to help. PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names. — Reply to this email directly, view it on GitHub <#322 (comment) <#322 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAPZSLFULSUFWHHKXJLLXXMY73ANCNFSM6AAAAAA4AIJSYU. You are receiving this because you are subscribed to this thread. That link shows 6 photos. Anyway the steps are Umbrella - settings - providers - enable external providers - select Cocoscraper. Also if you haven't installed the Cocoscraper repo id recommend doing so and also click on the version from within the Cocoscraper repo and update / install it. You won't lose any settings. This way you will get future updates from Cocoscraper — Reply to this email directly, view it on GitHub <#322 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4RVAP25JP6VYGOTG6ZVTJTXXM2XHANCNFSM6AAAAAA4AIJSYU>. You are receiving this because you commented.

Answer 6 · 2023-08-27T12:51:49.000Z

All sorted following above instructions, thanks again 👍

Answer 7 · 2023-08-27T15:11:05.000Z

All sorted following above instructions, thanks again 👍

Your most welcome

Answer 8 · 2023-08-27T15:11:55.000Z

OK, I am an idiot. Instead of scrolling down, I just hit next which sent me to a dancing doggy video. Sorry for being inept.
…
On Aug 27, 2023, at 8:13 AM, 666jones @.> wrote: When I follow the link to https://imgur.com/a/6LyyO3U I just see the Change Log. Is there an actual list of steps somewhere or would someone be so kind as to create a step-by-step list? … x-msg://14/# On Aug 27, 2023, at 7:58 AM, 666jones @.> wrote: It's not a bug. Follow the steps adamosborne83 kindly provided. Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here https://cocojoe2411.github.io/ I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy. UMBRELLA SET UP These are the steps required to allow Umbrella to now work with CoCo. https://imgur.com/a/6LyyO3U Fine, here is a Video too https://imgur.com/a/oiLDokr This is a really easy process to which the above should show you step by step. Which consists of 6 photos. Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully" FEN SET UP Again, see the link below with a picture Step by Step guide with 5 pictures to follow https://imgur.com/a/slPOHY9 Then you'll see "SUCCESS" Simple as that. Any issues then just say and I am sure people will be able to help. PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names. — Reply to this email directly, view it on GitHub <#322 (comment) <#322 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAPZSLFULSUFWHHKXJLLXXMY73ANCNFSM6AAAAAA4AIJSYU. You are receiving this because you are subscribed to this thread. That link shows 6 photos. Anyway the steps are Umbrella - settings - providers - enable external providers - select Cocoscraper. Also if you haven't installed the Cocoscraper repo id recommend doing so and also click on the version from within the Cocoscraper repo and update / install it. You won't lose any settings. This way you will get future updates from Cocoscraper — Reply to this email directly, view it on GitHub <#322 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAP25JP6VYGOTG6ZVTJTXXM2XHANCNFSM6AAAAAA4AIJSYU. You are receiving this because you commented.

Lol no worries hope you managed to get it working.

Answer 9 · 2023-08-27T15:13:04.000Z

OK, I am an idiot. Instead of scrolling down, I just hit next which sent me to a dancing doggy video. Sorry for being inept.

On Aug 27, 2023, at 8:13 AM, 666jones @.***> wrote:

When I follow the link to https://imgur.com/a/6LyyO3U I just see the Change Log. Is there an actual list of steps somewhere or would someone be so kind as to create a step-by-step list?

… x-msg://14/#

On Aug 27, 2023, at 7:58 AM, 666jones @.***> wrote: It's not a bug. Follow the steps adamosborne83 kindly provided. Ladies and Gents, as I am sure you are well aware that Umbrella and FEN now require a external scraper package for it to work. This is currently CoCoScraper, which the repo can be found here https://cocojoe2411.github.io/ I recommend installing this first, as that way any future CoCo updates will automatically be uploaded to your system. MAKE SURE TO INSTALL COCO SCRAPERS AGAIN, SO IT WILL RECEIVE REPO UPDATES. Do not worry you will not lose any settings in CoCo Now I am assuming you have done this, and have updated to the new version of Umbrella or FEN or BOTH. So Greedy. UMBRELLA SET UP These are the steps required to allow Umbrella to now work with CoCo. https://imgur.com/a/6LyyO3U Fine, here is a Video too https://imgur.com/a/oiLDokr This is a really easy process to which the above should show you step by step. Which consists of 6 photos. Once completed you will see a little pop up "CoCo Scrapers External Module set succesfully" FEN SET UP Again, see the link below with a picture Step by Step guide with 5 pictures to follow https://imgur.com/a/slPOHY9 Then you'll see "SUCCESS" Simple as that. Any issues then just say and I am sure people will be able to help. PS... for those of you that know me and my videos, you would have noticed I no longer include my hypnotising wallpaper. There are a couple of people to blame for this huge loss. Although I will not mention names. — Reply to this email directly, view it on GitHub <#322 (comment) #322 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAPZSLFULSUFWHHKXJLLXXMY73ANCNFSM6AAAAAA4AIJSYU. You are receiving this because you are subscribed to this thread.

That link shows 6 photos.

Anyway the steps are

Umbrella - settings - providers - enable external providers - select Cocoscraper.

Also if you haven't installed the Cocoscraper repo id recommend doing so and also click on the version from within the Cocoscraper repo and update / install it. You won't lose any settings. This way you will get future updates from Cocoscraper

—

Reply to this email directly, view it on GitHub #322 (comment), or unsubscribe https://github.com/notifications/unsubscribe-auth/A4RVAP25JP6VYGOTG6ZVTJTXXM2XHANCNFSM6AAAAAA4AIJSYU.

You are receiving this because you commented.

New update. All sources will include a dancing dog now.