Build 15: Bit Depth Switching causing unnecessary stuttering
MasterRahool opened this issue · 2 comments
MasterRahool commented
beta 10/build 15, connected to DAC via USB
Okay so here's my experience with the latest:
With Bit Depth Switching on:
- It "works", it does switch the bit depth
- when selecting a track with a different depth, my audio had to pause 3 times before the track started playing
- when selection the 2nd track on the same album (no switching involved!) it stuttered twice before playing, selecting the third track it stuttered like 3-4 times.
In its current state, I can't consider this functioning as intended
(I dont use this feature, just, assuming I really needed to have the right depth)
With Depth off:
- With depth off, things play fine on the same album
- no lag when switching between albums with the same bit rate & different depths
- only lag is when bitrate switching, the track starts and a split second later my dac has to adjust to the new bit rate, this isn't a consistent issue, sometimes it plays with no audio sneaking out the beginning
- i did find that going between, ie, from 88 to 96, sometimes it would go 88-48-96, but this wasn't consistent
MasterRahool commented
Found another issue while listening today.
- Listening to a 44.1k track, opened up a playlist on shuffle, the track is 44.1 but LSS changed it to 48k (which was the next song queued up)
- I went forward, then back again to get it to change to 44.1k
- A significant number of seconds later (10? as in, it wasnt in the initial couple when it usually changes), it forced itself back to 48k