visualapproach/Volvo-melbus

3D print a box for archi's PCB

Opened this issue 6 years ago · 7 comments

visualapproach commented 6 years ago

Be patient. Design is made. I just have to test print before release.

visualapproach commented 6 years ago

visualapproach commented 6 years ago

Features: strain relief, Holes for melbus, USB and extra. Click snap lid.

visualapproach commented 6 years ago

visualapproach commented 6 years ago

STL-files here:

Box for BT PCB_Clicksnap github melbus box v4_box_.zip

visualapproach commented 6 years ago

ULN2003A darlington IC to drive RGB LEDs. Controlled from the HU.
(I use common anode RGB LEDs and 12v. The resistor values are around 500 Ohms)

Sometime I will update the box since it is too tight to use sockets.

visualapproach commented 6 years ago

Clicksnap github melbus box v7.zip

Larger case to accomodate PCB + protoboard LED driver

visualapproach commented 6 years ago

See also schematics folder. You may need to redefine pin->color in code or hardware to get it right. HU says what color is set, like "purple" in the display.