Converter error for TUYA TS0121
dan73800 opened this issue · 1 comments
Good morning
I am a new user of Zigbee2MQTT 1.37.1 with Jeedom and I have successfuly paired about 10 plugs BLITZWOLF BSHP13 (_TZ3000_g5xawfcq) with my Sonoff ZDongle-E (firmware 7.4.3).
All my plugs are working fine and all values are read (power, current, energy and voltage)
But my logs are full of error messages :
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'current' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'power' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'energy' ("")
[2024-05-20 12:06:03] �[31merror�[39m: z2m: No converter available for 'voltage' ("")
It is always the same sequence repeating.
With 10 plugs and a refresh every 1mn, my log is filling quickly.
I can understand that the trouble is concerning a missing converter, but what can I do to solve it ?
My experience and my english are not good enough to know what and where to search for an issue.
If anyone can help me, it will be appreciated
Best regards
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days